
The AirTAC GC600-20 FRL Unit (GC60020F3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020F3T is an AirTAC G-series three-unit F.R.L. combination: a separate filter, regulator and lubricator built up as one 600-size set with NPT3/4 (3/4 in) ports. This configuration carries the standard 40 um filter element, the default differential-pressure drain, and an embedded square gauge reading in bar. With a standard-type regulator, the setting range with the differential-pressure drain is 0.15-0.9 MPa (20-130 psi). Medium is compressed air only; max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The G-series F.R.L. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. On the 600 size the bowl is aluminium alloy. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application on request.
| Model | AirTAC GC600-20 FRL Unit (GC60020F3T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Preparing the air for the stop-and-go cylinders and pushers along a bottling hall conveyor, with the bar-scale square gauge matching a metric maintenance standard.
A standard air-preparation stack specified by a packaging machine builder, using the 40 um element for general plant air at each machine station.
Conditioning supply air for a palletiser's gripper and clamp cylinders at the end of a case line, with the regulator holding the circuit setting at the machine.
The 600 size with 3/4 in NPT ports is the largest step in the G-series range; moving down to the 400 or 300 size reduces the port and the flow window, so match the step to your line's demand. The differential-pressure drain on this set works automatically across the filter element; manual and automatic drains are the alternatives if your maintenance routine differs. The 40 um element is the standard grade for general plant air, with the 5 um W element as the finer option. The square gauge here reads in bar; MPa, psi and a round external gauge are available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
There is no single rated flow figure for this set: AirTAC publishes flow for the GC series as curves. Share your line demand with us and we will confirm the matching figures and datasheet details on request before you order.
The blank position gives a square gauge with the standard scale, and the trailing digit selects MPa (1), psi (2) or bar (3) - this model is bar. A round external gauge is the alternative style. Choose the scale your maintenance team reads every day.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.