
The AirTAC GC600-20 FRL Unit (GC60020MC1WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator working together to clean, regulate and oil-mist lubricate a compressed-air supply. This 600-size set carries 3/4 inch NPT ports, a manual drain on the filter bowl, a 5 um filter element and a round external pressure gauge scaled in MPa. The 600-size bowls are aluminium alloy, the regulator adjusts from 0.05-0.9 MPa (7-130 psi) with manual drain, and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um filtration, MPa, psi or bar gauge scales, and three thread types (NPT on this code); a reverse/check valve can be specified. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and the datasheet for your application. Order code GC60020MC1WT has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC600-20 FRL Unit (GC60020MC1WT) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Prepares the air feeding the clamp and weld-gun actuation manifold on an automotive body assembly line, where the 3/4 inch port serves multiple cylinders from one supply drop.
Conditions the supply reaching bottle grippers, diverters and stopper cylinders on a bottling line, with the 5 um element helping protect downstream valves from water and particles.
Sits in the shop-air feed entering a CNC machining centre, cleaning, regulating and lubricating the air before it reaches tool-change cylinders and pneumatic clamps.
Choose between the 200, 300, 400 and 600 sizes to match the flow your line needs; 600 is the largest, with 3/4 inch ports on this model. Drain type matters: manual drain (M here) suits attended installations where bowls are drained on a routine, while automatic or differential-pressure drains suit unattended runs - and note the regulator range is 0.05-0.9 MPa (7-130 psi) with manual drain versus 0.15-0.9 MPa (20-130 psi) with the other two. The 5 um element (W) is finer than the 40 um standard. This set carries a round external gauge in MPa; psi and bar scales are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the G series as curves rather than a single rated figure, so we do not quote one number here. Tell us your application and we will confirm the sizing and flow figures from the datasheet on request before you order.
The M in the code means the filter bowl is drained by hand on a routine. GC sets can also be ordered with automatic (A) or differential-pressure (blank) drains for unattended installations. The regulator adjustment range depends on drain type: 0.05-0.9 MPa (7-130 psi) with manual drain, 0.15-0.9 MPa (20-130 psi) with automatic or differential-pressure drain.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.