
The AirTAC GC600-20 FRL Unit (GC60020MC1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator working together to clean, regulate and oil-mist lubricate a compressed-air supply. This 600-size set carries 3/4 inch NPT ports, a manual drain on the filter bowl, a 5 um filter element, a round external pressure gauge scaled in MPa, and a reverse/check valve fitted in the regulator. The 600-size bowls are aluminium alloy, the regulator adjusts from 0.05-0.9 MPa (7-130 psi) with manual drain, and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um filtration, MPa, psi or bar gauge scales, three thread types (NPT on this code), and an optional reverse/check valve. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and the datasheet for your application. Order code GC60020MC1WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC600-20 FRL Unit (GC60020MC1WTK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding the weld-gun and fixture-clamp manifold of a robotic welding cell, with the check-valve arrangement specified at the cell's supply drop.
Supplies filtered, regulated and lubricated air to the diverter and pusher stations along a parcel-sorting conveyor, served through the 3/4 inch port.
Prepares the air for the vacuum-blower feed, cylinder clamps and flap-fold actuators of a case-erector machine at the head of a carton packaging line.
Step between the 200, 300, 400 and 600 sizes to match required flow; 600 is the largest, with 3/4 inch ports here. Drain choice: manual drain (M) suits attended installations, while automatic or differential-pressure drains suit unattended runs - the regulator range is 0.05-0.9 MPa (7-130 psi) with manual drain versus 0.15-0.9 MPa (20-130 psi) otherwise. The K in this code means a reverse/check valve is fitted; order without K if you do not need one. The 5 um element (W) is finer than the 40 um standard, and the round external gauge is scaled in MPa, with psi and bar scales as alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
Flow for the G series is published by AirTAC as curves rather than a single rated figure, so we do not state one number on the page. Share your application details and we will confirm sizing and the flow/datasheet figures on request.
K indicates a reverse/check valve is fitted in the regulator of this set. The same set without K, code GC60020MC1W, is supplied without the check valve, so choose the suffix according to whether your circuit needs that arrangement.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.