
The AirTAC GC600-20 FRL Unit (GC60020MF1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator working together to clean, regulate and oil-mist lubricate a compressed-air supply. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The 600-size bowls are aluminium alloy, the regulator adjusts from 0.05-0.9 MPa (7-130 psi) with manual drain, and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is offered in 200, 300, 400 and 600 sizes with a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um filtration, MPa, psi or bar gauge scales, and three thread types (NPT on this code); a reverse/check valve can be specified. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and the datasheet for your application. Order code GC60020MF1T has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC600-20 FRL Unit (GC60020MF1T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Prepares the air feeding the pick-and-place modules and board-clamp cylinders of an SMT support cell, supplied from the 3/4 inch drop at the cell.
Conditions the supply for the pallet pushers, mould clamps and Handlers on a concrete-block production line, where the standard 40 um element handles general plant air.
Feeds filtered, regulated and lubricated air to the bar-material feeder and collet-closer cylinders of an automatic screw machine on a turning shop floor.
Match the 200, 300, 400 or 600 size to the flow your equipment needs; 600 is the largest, with 3/4 inch ports here. Drain type: manual drain (M in this code) suits attended installations, while automatic or differential-pressure drains suit unattended runs - the regulator range is 0.05-0.9 MPa (7-130 psi) with manual drain versus 0.15-0.9 MPa (20-130 psi) otherwise. No W in the code means the standard 40 um element; order the W version for the 5 um grade. The gauge here is the embedded square type in MPa; an external round gauge in MPa, psi or bar is the alternative. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes G-series flow as curves rather than a single rated figure, so no single number is quoted here. Send us your application details and we will confirm sizing and the flow/datasheet figures on request.
F in this code is the embedded square gauge, and 1 sets its scale to MPa. Units with a regulator can also carry an optional external round gauge, with scales 1 = MPa, 2 = psi and 3 = bar, so you can match the gauge to the practice on your plant floor.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.