
The AirTAC GC600-20 FRL Unit (GC60020MF1TK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
GC60020MF1TK is a genuine AirTAC G-series three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator that together clean, regulate and oil-mist lubricate the compressed air at one supply point. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. At the 600 size, the filter and lubricator bowls are aluminium alloy.
As a catalogue AirTAC part it is rated for compressed air at up to 1.0 MPa (145 psi) inlet, working from -5 to 70 C (non-freezing). With this manual-drain configuration the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi). Flow figures for the GC series are published as curves rather than a single rating, so we confirm the datasheet numbers for your duty on request.
| Model | AirTAC GC600-20 FRL Unit (GC60020MF1TK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
A 3/4 in FRL set at the main drop of an assembly bay, feeding impact wrenches, air ratchets and clamping fixtures from a single conditioned take-off point.
Supplying the cylinders and air grippers on a rinse-fill-capper conveyor, where the filter stage removes water and the lubricator mists oil to the pneumatic actuators.
Conditioning the 3/4 in shop-air feed into a machining centre that runs pneumatic tool changers, clamps and chip-clearing jets.
The GC series runs in 200, 300, 400 and 600 sizes; 600 is the largest, with this unit carrying a 3/4 in NPT port and 1 in ports available elsewhere in the size. Step up in size as the port diameter and air demand at the point of use grow. Drain type is a real choice: manual (this code) needs an operator to open the bowl, while automatic and differential-pressure drains are separate codes in the same series. The standard 40 um element suits general supply; specify the W-coded 5 um element for finer filtration. Gauge codes set the scale: 1 = MPa, 2 = psi, 3 = bar. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue thread options. Because flow is published as curves, not a single rating, ask us to confirm sizing against your air consumption before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as characteristic curves rather than one rated number, so we do not quote a single figure. Send us your air demand and pressure and we will confirm the relevant flow data from the datasheet on request.
The M in the code means the filter bowl is drained by hand when condensate collects. The same 600 series is also available with an automatic drain (A) or the differential-pressure drain (blank code), so you can choose based on how often someone can attend the unit.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.