
The AirTAC GC600-25 FRL Unit (GC60025AC1WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AC1WTK is an AirTAC G-series three-unit F.R.L. combination: separate air filter, pressure regulator and lubricator units assembled as one set for compressed air. This configuration is size 600 with NPT 1 inch ports, an automatic drain on the filter bowl, a 5 um filter element, a round external gauge scaled in MPa and a fitted reverse (check) valve. The regulator adjusts 0.15-0.9 MPa (20-130 psi) with this drain type, maximum inlet pressure is 1.0 MPa (145 psi), the aluminum alloy bowls suit the large 600 frame, and working temperature is -5 to 70 C.
This is a genuine AirTAC part. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. AirTAC publishes 600-size flow as curves rather than one rated figure; ask us to confirm the datasheet numbers for your application before ordering.
| Model | AirTAC GC600-25 FRL Unit (GC60025AC1WTK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Conditions air for core-pull and ejector circuits on an injection molding press, with the fitted check valve guarding the set against reverse flow during plant air surges.
Supplies gripper and clamp cylinders on an end-of-line palletizer, where the automatic drain handles condensate carried in from a 1 inch shop main.
Feeds impact tools and lift assists in a heavy-equipment service bay, with the MPa gauge matching the workshop's metric instruments.
Size 600 with a 1 inch port is the largest step in the G series; step down to 400, 300 or 200 (3/4 to 1/8 inch) when your circuit uses less air. Drain choices are differential-pressure (default), automatic (this model) and manual; automatic suits lines that run unattended. The 5 um W element is the finer option against the 40 um standard, and the K option on this model adds a reverse (check) valve against the plain GC60025AC1W. Gauge here is a round external gauge reading in MPa; psi or bar scales and the embedded square gauge are alternatives. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not one rated number, so send us your flow demand and working pressure and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
There is no single rated flow figure for this unit: AirTAC publishes G-series capacity as flow curves across pressures and port sizes, so we do not quote a number as a rating. Share your required flow and working pressure and we will confirm the datasheet curve values for the 600 size on request before you order.
Only by the K option: the WK code adds a fitted reverse (check) valve that blocks reverse flow through the set. Everything else matches - size 600, NPT 1 inch ports, automatic drain, 5 um filter element and a round external gauge scaled in MPa.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.