
The AirTAC GC600-25 FRL Unit (GC60025AC3T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator supplied as one matched set. This GC60025AC3T is the largest 600 size, fitted with NPT1" ports for high-flow compressed-air supply lines. The filter bowl drains automatically, the regulator carries an external round gauge reading in bar, and the element is the standard 40 um grade. It is for compressed air only, rated up to 1.0 MPa (145 psi) maximum working pressure, with an operating temperature of -5 to 70 C (non-freezing). The regulator covers 0.15-0.9 MPa (20-130 psi) with automatic drain, and the 600-size bowls are aluminium alloy.
This is a genuine AirTAC part. The G series comes in 200, 300, 400 and 600 sizes with a choice of three thread types (NPT on this code), differential-pressure, automatic or manual drains, 40 um or 5 um (W) filtration, and square or round gauges in MPa, psi or bar scales. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and the full datasheet for your application.
| Model | AirTAC GC600-25 FRL Unit (GC60025AC3T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Point-of-use conditioning on a 1 in. drop feeding pneumatic press cylinders - filtered, regulated and lubricated air for clamping and forming work, with a bar-scale gauge readable at the machine.
Conditioning the air feeding gate, divider and pusher cylinders on a bottling conveyor, where the automatic drain keeps condensate out of the valve manifold without a daily bowl routine.
Supplying filtered and lubricated air to textile looms and air-motor drives on large-bore lines, where a steady oil mist supports cylinder and vane life over long production runs.
Size 600 is the largest step in the G series, so start here when your pipe run is 1 in. and the demand is at the top of the range; if your ports are smaller, the 400, 300 and 200 sizes step down accordingly. Drain options are differential-pressure (default), automatic and manual - this unit has automatic drain, which suits unmanned lines. Filter grade is 40 um as standard; specify the W variant if you need the 5 um element. Gauge scale is your call: bar here, or MPa or psi on other variants.
This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G (BSPP) and NPT are catalogue options to order. Because AirTAC publishes flow as curves rather than a single rated figure, ask us to confirm sizing against your actual air demand before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the G series as performance curves rather than a single rated figure, so no one number is quoted here. Tell us your pipe size and air demand and we will confirm correct sizing from the datasheet on request.
The C3 suffix specifies an external round gauge reading in bar. Square embedded gauges and MPa or psi scales are also catalogue options on the GC series - pick the one that matches the gauges already fitted in your plant, and we will confirm the exact variant on request.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.