
The AirTAC GC600-25 FRL Unit (GC60025AF2T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC60025AF2T is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator units assembled as one 3-piece set for 1 in NPT ports. The filter uses the standard 40 um element, the drain is automatic (A) so condensate is expelled without manual attention, and the embedded square gauge is scaled in psi (F2) for shops that read pressure in imperial units. The size 600 filter bowl is aluminium alloy.
This is a genuine AirTAC part for compressed air only, rated to 1.0 MPa (145 psi) maximum working pressure and operating from -5 to 70 C (non-freezing). The regulator adjustment range for this automatic-drain set-up is 0.15-0.9 MPa (20-130 psi). G (BSPP) and NPT threads are catalogue options, and flow figures are published as curves, so ask us to confirm sizing and datasheet details on request.
| Model | AirTAC GC600-25 FRL Unit (GC60025AF2T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Conditions the compressed air branch feeding mould-tool actuation and eject circuits on moulding machines, with the regulator holding a steady set pressure and the automatic drain keeping moisture out of the aluminium bowl.
Installed ahead of the pneumatic valve manifold on a bottling conveyor, the set filters the supply, regulates it to the actuator band and lubricates the cylinders, with the psi gauge matching the plant's imperial gauges.
Mounted on the plant-air main serving clamp and palletiser circuits, it delivers filtered, regulated and lubricated air to the actuators, while the automatic drain handles condensate from the long runs typical of outdoor plants.
Size 600 with 1 in NPT ports is the top of the G series range; drop to size 400 (3/4 in) when the line and demand are smaller. This model pairs the standard 40 um element with an automatic drain and an psi-scaled square gauge - handy where gauges on site are read in psi rather than MPa. Alternatives in the same frame cover the 5 um (W) element, a manual or differential-pressure drain, other gauge scales or no gauge at all.
Because flow is published as curves rather than a single rating, tell us your application and we will confirm the sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
No single rated number exists in the published data - AirTAC supplies G-series flow as curves. Tell us your line conditions and demand and we will confirm the correct size from the datasheet on request before you order.
F2 selects the embedded square gauge scaled in psi instead of MPa. The set keeps the standard 40 um filter element and an automatic drain. If your panel reads in MPa, choose the corresponding MPa-scaled code in the same size 600, 1 in NPT configuration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.