verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GC600 · F.R.L. Combination (filter + regulator + lubricator)

AirTAC GC600-25 FRL Unit (GC60025AF2WT)

The AirTAC GC600-25 FRL Unit (GC60025AF2WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).

  • TypeF.R.L. combination (3 units)
  • Port sizePT1"
  • Regulating range0.15 - 0.9 MPa (20 - 130 psi)
  • Filtering grade5 µm
  • DrainAutomatic drain
  • Bowl materialAluminium alloy
  • Pressure gaugeFitted
  • ThreadNPT
$252.49 $259.99Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GC600-25 drain, gauge and thread option on one page All GC600-25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GC600-25 FRL Unit (GC60025AF2WT)

The AirTAC GC600-25 is a three-piece F.R.L. combination that conditions compressed air in one assembly: a filter removes water and particulate, a regulator holds downstream pressure steady, and a lubricator adds an oil mist for air-powered tools and cylinders. This 600-size unit has a NPT1 (1 in) port, a 5 um filter element (the finer of the two catalogue grades), an automatic drain that expels collected condensate without manual attention, and an aluminium alloy bowl. The standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the embedded square gauge reads in psi. No reverse/check valve is fitted, and the mounting bracket is included.

This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge scales and thread options, so a configuration can be matched to most plant air drops. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering. Order code GC60025AF2WT has NPT ports (the T in the code) for North American pipe fittings.

AirTAC GC600-25 FRL Unit (GC60025AF2WT) Technical Specifications

ModelAirTAC GC600-25 FRL Unit (GC60025AF2WT)
SeriesGC600 F.R.L. combination
CompositionFilter + regulator + lubricator (3 units)
Port sizePT1" (NPT thread)
Filtering grade5 µm
Regulating range0.15 - 0.9 MPa (20 - 130 psi)
Pressure typeStandard type
FluidCompressed air
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Drain typeAutomatic drain
Bowl materialAluminium alloy
Pressure gaugeFitted — square, psi scale
Reflux valveNot fitted

Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GC600-25 FRL Unit (GC60025AF2WT)

GC600G-series F.R.L. combination, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
ADrain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)).
(blank)Standard type. Blank is standard, L is the low-pressure type.
(blank)Pressure gauge fitted (blank).
FGauge shape: Square. C is round, F is square.
2Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.
(blank)No reverse-flow valve (the default).

Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.

Size Class & How It Differs From GFC

  • GC200PT1/8" - PT1/4"
  • GC300PT1/4" - PT1/2"
  • GC400PT3/8" - PT1/2"
  • GC600PT3/4" - PT1"

A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.

This modelGC600 · PT1" · 5 µm
One size downGC400
Two-unit equivalentGFC600-25
Build orderFilter → regulator → lubricator

Where the AirTAC GC600-25 FRL Unit (GC60025AF2WT) Is Used

factory

Automotive assembly line air supply

Installed at the header feeding impact wrenches, nutrunners and pneumatic clamps along an assembly line: the filter strips water and swarf, the regulator holds a steady setting for torque tools, and the lubricator keeps the tool motors running smoothly through a full shift.

conveyor_belt

Packaging line carton-sealing cylinders

Mounted on the air drop serving carton-forming and sealing stations, where the 5 um element protects the small control valves from particulate, the regulator keeps cylinder stroke speed repeatable, and the oil mist reduces seal wear on high-cycle cylinders.

precision_manufacturing

Machine-shop pneumatic clamping fixtures

Fitted ahead of clamping fixtures on CNC machining cells: stable regulated pressure gives consistent clamping force part after part, the automatic drain keeps condensate out of the fixture circuit without operator attention, and the psi gauge lets setters verify the setting at a glance.

Is the AirTAC GC600-25 FRL Unit (GC60025AF2WT) the Right Station?

Start with the port and size step: 600 is the largest G-series size, and here it carries a 1 in NPT port, so match it to the main air line feeding a large section of the plant rather than a single bench drop. Choose the drain to suit access: automatic (as on this unit) suits installations that are hard to reach; manual suits attended stations; the differential-pressure default drains only when the pressure drop justifies it. Filter grade is 40 um standard or 5 um (code W) for finer protection - this unit carries the 5 um element. The gauge is the embedded square type with a psi scale; an external round gauge in MPa, psi or bar is optional. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. a bracket is included.

One honest note on sizing: flow for this family is published as curves, not as a single rated number, so we cannot quote a rated flow here. Send us your application details and we will confirm the sizing against the datasheet before you order.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain sets the regulating band
  • ✓ Gauge fitted, shape and scale
  • ✓ Three-unit (GC) or two-unit (GFC) layout
  • ✓ Oil mist acceptable downstream
Ask an Engineer

Installation & Maintenance Notes

  • check Install with the airflow arrow: filter first, lubricator last.
  • check Mount vertically, bowls down.
  • check Keep inlet pressure at or below 1.0 MPa (145 psi).
  • check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
  • check Drain condensate before the bowl fills; check the oil level.
  • check Keep the station above freezing (-5 to +70 °C, unfreeze).

The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.

AirTAC GC600-25 FRL Unit (GC60025AF2WT) FAQ

AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and line conditions and we will confirm the flow and sizing against the datasheet on request before you order.

The automatic drain expels collected condensate on its own, which suits bowls mounted high or in positions that are awkward to reach; manual and differential-pressure drains are the alternatives in the range. The 5 um element (code W) is the finer of the two catalogue filter grades - 40 um is the standard - so it gives finer protection to downstream valves and cylinders.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GC600-25 FRL Unit (GC60025AF2WT)

Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GC60025AF2WT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.