
The AirTAC GC600-25 FRL Unit (GC60025ALF2WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC600-25 is a three-piece AirTAC F.R.L. combination: a separate filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation set for compressed air. In this configuration the 1 in NPT port serves larger supply lines, the filter element is the fine 5 um grade (W), the bowl drains automatically, the regulator is the low-pressure type, an embedded square gauge with psi scale is fitted, and a reverse/check valve is included. The filter bowl on this 600 size is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, thread options three thread types (NPT on this code), drain choices, 40 um standard or 5 um fine filtration, gauge scales in MPa, psi or bar, and optional reverse/check valves. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request. Order code GC60025ALF2WTK has NPT ports (the T in the code) for North American pipe fittings.
| Model | AirTAC GC600-25 FRL Unit (GC60025ALF2WTK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds a spray-booth air drop where fine 5 um filtration protects finish quality, the automatic drain keeps condensate off the line during shifts, and the low-pressure regulator holds the gentle pressure spray guns need.
Prepares air for case packers and labeler actuators on a 1 in header: the filter removes water and particles, the lubricator mists oil for cylinder life, and the check valve holds downstream pressure if supply dips.
Serves a machining cell's clamps and actuated doors from a large plant-air takeoff, with the psi-scaled square gauge letting operators set and verify working pressure at the machine and the auto drain handling condensate.
Size and port are the first choice: this unit is size 600 with a 1 in NPT port, the largest step in the GC range, so match it to supply lines and expected air demand at that scale; smaller sizes 200/300/400 step down in port and flow. The 5 um element (code W) suits applications needing finer particulate removal than the 40 um standard. The automatic drain (code A) empties the bowl without manual attention - choose manual or differential-pressure drain only if you prefer a different service routine. The low-pressure regulator type is selected for circuits that work below standard regulated pressures; note the exact adjustment range for this low-pressure variant is not published, so confirm it with us. The square gauge here reads psi; MPa and bar scales are the other options, and an external round gauge is available. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Because flow for this series is published as curves and not as a single rated number, please ask us to confirm sizing against your actual air demand before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and line conditions and we will confirm the relevant datasheet flow-curve figures on request before you order.
In the code GC60025ALF2WTK, the A selects the automatic drain, which expels collected condensate from the bowl without anyone opening it - useful on large 600-size bowls in continuous service. The W selects the 5 um fine filter element instead of the 40 um standard, for cleaner air downstream. Both are configuration choices you can order differently on other GC600 variants.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.