
The AirTAC GC600-25 FRL Unit (GC60025C1T) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC60025C1T is an AirTAC G-series three-unit F.R.L. combination: separate filter, regulator and lubricator units assembled as one 3-piece set for 1 in NPT ports. The filter uses the standard 40 um element, the drain is the differential-pressure default (it passes condensate as flow-induced pressure difference builds), and an external round gauge scaled in MPa (C1) is fitted. The size 600 filter bowl is aluminium alloy.
This is a genuine AirTAC part for compressed air only, rated to 1.0 MPa (145 psi) maximum working pressure and operating from -5 to 70 C (non-freezing). The regulator adjustment range for this differential-pressure-drain set-up is 0.15-0.9 MPa (20-130 psi). G (BSPP) and NPT threads are catalogue options, and flow figures are published as curves, so ask us to confirm datasheet details on request.
| Model | AirTAC GC600-25 FRL Unit (GC60025C1T) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Conditions the compressed air feeding the winder's pneumatic control panels: filtered, regulated and lubricated supply to the positioner circuits, with the round MPa gauge matching the mill's metric instrumentation.
Mounted ahead of the palletiser's cylinder bank on a packing line, the set filters plant air to 40 um, regulates it for the clamp and pusher actuators and lubricates them, with the differential-pressure drain working unattended.
Installed on the utility-air skid serving clean-in-place valve actuation in a dairy, it conditions the supply for hygienic valve tops, with the MPa-scaled round gauge giving operators a local set-point readout.
Size 600 with 1 in NPT ports is the largest G-series step; choose size 400 (3/4 in) or smaller where the line and demand allow. This model keeps the standard 40 um element and the differential-pressure drain - the catalogue default that needs no drain setting - and adds an external round MPa gauge, which suits panels that read in MPa. Codes in the same frame change the drain to automatic or manual, the element to 5 um, the gauge scale to psi, or drop the gauge.
Because flow is published as curves rather than a single rating, send us your duty and we will confirm the sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes G-series flow as curves, not as a single rating, so no one-number figure is quoted here. Tell us your line pressure and demand and we will confirm the sizing against the datasheet on request.
The differential-pressure drain is the catalogue default: condensate passes as the pressure difference across the filter builds during flow. The automatic-drain codes expel condensate on their own cycle, while manual-drain codes are emptied by hand. The regulator adjustment range is 0.15-0.9 MPa (20-130 psi) for the differential and automatic versions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.