
The AirTAC GC600-25 FRL Unit (GC60025C2WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025C2WT is an AirTAC GC series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one treatment station. This configuration is built around a 1 in. NPT port for high-flow compressed-air lines, with a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, and a round pressure gauge reading in psi. The 600 size filter and lubricator bowls are aluminium alloy, and the unit is supplied with a mounting bracket.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600, with port options from 1/8 in. up to 1 in., a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, gauge scale options, and three thread types (NPT on this code). Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | AirTAC GC600-25 FRL Unit (GC60025C2WT) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A 1 in. F.R.L. station at the head of a body-shop ring main, cleaning and regulating the supply before it branches to impact wrenches, weld-clamp actuators and lift tables, while the lubricator feeds mist oil to the tool circuit.
Mounted at the inlet to a bottling plant's conveyor and filler-actuation air supply, where the 5 um element protects poppet valves from particulate and water carryover and the regulator holds a steady setting across the shift.
Installed where a mill or fabrication shop splits a large-bore air header into tool drops, giving each branch filtered, regulated and lubricated air for grinders, chippers and air motors on a 1 in. supply.
Start with the port and size step: this unit is the 600 size with a 1 in. NPT connection, the largest step in the range, so size up or down against the air demand of the line rather than the pipe alone. The filter here carries the 5 um element; the standard grade is 40 um, so choose 5 um where downstream valves and cylinders need finer protection. Drain type is a real choice across the series: differential-pressure (as fitted here), automatic, or manual. The gauge scale (MPa, psi or bar) and the thread (NPT on this code) are also selectable, as is the bracket.
Flow for this series is published as curves, not a single rating, so we cannot quote one number here. Send us your application details and we will confirm the sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your line pressure and air demand and we will confirm the sizing from the datasheet on request before you order.
The W in the code GC60025C2WT selects the 5 um element; the catalogue standard grade is 40 um. The 5 um grade suits circuits with sensitive valves and cylinders, while 40 um remains available on other GC configurations if coarser general-line protection is preferred.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.