
The AirTAC GC600-25 FRL Unit (GC60025F2WTK) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025F2WTK is a genuine AirTAC GC-series three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one treatment stack. This size 600 unit is built for a 1 in NPT port, carries the W-coded 5 um filter element for finer water and particulate removal, uses the differential-pressure drain on the filter bowl, and is fitted with the embedded square gauge reading in psi. The K code adds a reverse (check) valve, and the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, gauge scale options, and three thread types (NPT on this code). Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
| Model | AirTAC GC600-25 FRL Unit (GC60025F2WTK) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds spray-booth and paint-line air drops where the 5 um element, regulated pressure and consistent oil misting protect spray guns and finish quality across a full shift.
Prepares the main air supply to a CNC machining cell: filtered, regulated and lubricated air for tool changers, clamps and pneumatic actuators on the shop floor.
Serves the valve manifold feeding case packers and conveyor diverters on a packaging line, where the check valve helps hold set pressure and the lubricator conditions cylinder air.
Step up through the size codes (200/300/400/600) and their matching ports until the pipe size and expected air demand are covered - this unit sits at the top of the range on a 1 in NPT connection. Choose the drain to suit attendance: differential-pressure (as here) drains automatically on flow, automatic drains continuously, and manual drain suits supervised points. Pick 40 um for general protection or the 5 um W element, as specified here, where downstream valves and actuators need finer air. Select the gauge scale (MPa, psi or bar - this unit is psi) and decide whether the reverse/check valve is wanted to hold downstream pressure. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. G and NPT are order options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the flow and the full datasheet for this model on request before you order.
W is the fine filtration option: a 5 um element instead of the 40 um standard, for cleaner air to sensitive valves and actuators. K means a reverse (check) valve is fitted, which helps hold downstream pressure if the upstream supply drops. Both are decodable straight from the model code.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.