
The AirTAC GC600-25 FRL Unit (GC60025MLC2WT) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one set. This GC60025MLC2WT is the size 600 unit for 1 in. NPT1 threaded lines. The filter carries a 5 um element (code W) in an aluminium alloy bowl with a manual drain, so condensate is drained by hand on a schedule you control. The regulator is the L low-pressure type, fitted with an external round gauge reading in psi; its exact adjustment range is not published in our data, so confirm it with us if your set pressure is critical. A reverse (check) valve is not fitted, the maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C non-freezing, and a mounting bracket is included.
This is a genuine AirTAC part. The GC range spans sizes 200, 300, 400 and 600 with ports from 1/8 in. up to 1 in., drain choices (differential-pressure, automatic or manual), 40 um standard or 5 um filtration, gauge and scale options, and three thread types (NPT on this code). Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | AirTAC GC600-25 FRL Unit (GC60025MLC2WT) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to pneumatic clamps and tool-change cylinders on a machining centre, with the 5 um element protecting downstream valves from fine particulate and rust scale.
Supplying air to impact wrenches and air motors at assembly stations: the lubricator carries an oil mist to the tools while the regulator holds the working pressure the station was set up for.
Running pneumatic diverters, pushers and gripper cylinders on a bottling and packaging conveyor, with the manual-drain filter bowl checked and drained as part of routine shift maintenance.
Size 600 with a 1 in. NPT port is the largest step in the GC range; choose size and port against the air demand of your line and let us check the published flow curves with you before you commit. Drain type is a real choice: this unit has a manual drain (code M), while differential-pressure (the default) and automatic drains are available on other GC codes. The W code selects the 5 um element instead of the 40 um standard. The gauge here is the external round type reading psi; embedded square gauges and MPa or bar scales are the other options. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing from the datasheet.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment, and we will confirm the sizing from the datasheet on request.
The M in the code selects a manual drain on the filter bowl: condensate is drained by hand during routine checks. Differential-pressure drain (the default) and automatic drain are available on other GC codes if you would rather not rely on manual draining.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7 hours.