Airtac GF Filter GF300C10
The AirTAC Airtac GF Filter GF300C10 is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with See datasheet ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizeSee datasheet
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GF Filter GF300C10
The AirTAC GF300C10 is a G-series air filter for compressed air only: it removes water and particulate, with no regulation and no lubrication. This is the size 300 body with a 3/8 in PT port, the standard 40 um element, and the default differential-pressure drain that discharges condensate as the pressure drop across the element builds.
This is a genuine AirTAC part. The GF family spans sizes 200, 300, 400 and 600, with ports from 1/8 to 1 in, PT thread standard and G (BSPP) or NPT as catalogue options, a choice of 40 um or 5 um elements, and differential-pressure, automatic or manual drains. Flow is published as curves rather than a single rating, so ask us to confirm sizing and the datasheet on request.
Airtac GF Filter GF300C10 Technical Specifications
| Model | Airtac GF Filter GF300C10 |
|---|---|
| Series | GF300 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GF Filter GF300C10
| GF300 | G-series air filter, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF300 · See datasheet · 40 µm |
|---|---|
| One size down | GF200 |
| One size up | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac GF Filter GF300C10 Is Used
Packaging line conveyor air
Installed on the 3/8 in air feed to a packaging line, the GF300C10 removes water and debris before it reaches the diverters, pushers and stop cylinders that index cartons along the conveyor.
Plant ring-main drop points
Used at ring-main drop points around a factory floor, this filter cleans the general plant air supply feeding hand tools, blow guns and small actuators, with the differential-pressure drain handling collected condensate.
Workshop impact-tool supply
Mounted at the workshop wall outlet feeding impact wrenches and air ratchets, the 40 um element and 3/8 in PT port give a straightforward filter point for general mechanical work.
Is the Airtac GF Filter GF300C10 the Right Filter?
This model gives you a 3/8 in PT connection on the size 300 body - a sensible step when your air demand needs more than a 1/4 in line but not the larger 400/600 bodies. The standard 40 um element suits general-purpose air preparation; specify the W variant for 5 um. Drain is the default differential-pressure type, with automatic and manual variants available. Thread is PT standard, with G and NPT to order, and a bracket is included. Flow is published as curves, not a single rating, so have us confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac GF Filter GF300C10 FAQ
We do not quote a single rated flow because AirTAC publishes GF-series performance as flow curves, not one number. Send us your pressure and consumption figures and we will confirm the curves and full datasheet for this model on request before you order.
This model uses the default differential-pressure drain, which discharges condensate when the pressure drop across the element rises. The same size 300 body is also available with an automatic drain (code A) for hands-free operation or a manual drain (code M) - tell us which suits your maintenance routine.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GF Filter GF300C10
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.