Airtac GF Filter GF300C10AJW
The AirTAC Airtac GF Filter GF300C10AJW is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with See datasheet ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizeSee datasheet
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GF Filter GF300C10AJW
GF300C10AJW is an AirTAC GF-series air filter, a filtration-only unit: it removes condensed water and particulate from compressed air and performs no pressure regulation and no lubrication. This configuration is the size 300 body with a 3/8" PT port, the fine 5 um filter element, an automatic drain that ejects collected condensate from the polycarbonate bowl without manual attention, and it ships without a mounting bracket. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GF series is available in sizes 200, 300, 400 and 600, with 40 um standard or 5 um (W) filtration, differential-pressure (default), automatic (A) or manual (M) draining, and optional G (BSPP) or NPT (T) threads in place of the standard PT. Filtration performance is published as flow curves rather than a single rated figure, so ask us to confirm the datasheet and flow data against your application on request.
Airtac GF Filter GF300C10AJW Technical Specifications
| Model | Airtac GF Filter GF300C10AJW |
|---|---|
| Series | GF300 air filter |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GF Filter GF300C10AJW
| GF300 | G-series air filter, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF300 · See datasheet · 40 µm |
|---|---|
| One size down | GF200 |
| One size up | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the Airtac GF Filter GF300C10AJW Is Used
CNC machine tool air supply
Dropped into the compressed air line feeding a machining centre's pneumaticToolchangers and clamps, this filter strips water and 5 um-scale particulate before they reach sensitive valves, with automatic drain keeping the bowl clear through unattended shifts.
Pneumatic valve manifold protection
Installed upstream of a solenoid valve manifold on an automated assembly line, it removes condensate and fine debris that cause valve sticking, while the automatic drain handles condensate without operator rounds.
Packaging line cylinder supply
Mounted on the air feed to conveyor diverters and packaging cylinders, it keeps moisture and particles out of the actuators; the 3/8" PT port suits the branch lines typical of such equipment.
Is the Airtac GF Filter GF300C10AJW the Right Filter?
Size 300 with the 3/8" PT port is the middle step of the GF range; step up to 400 or 600 if your line's flow demand calls for a larger port, or down to 200 for compact points of use. Choose the 5 um element (W) when downstream valves and cylinders need finer protection than the standard 40 um, and the automatic drain (A) when the unit sits where manual blow-downs are impractical. The J suffix omits the mounting bracket; order without it only if you panel- or line-mount by other means. PT is the standard thread; G (BSPP) and NPT (T) are catalogue options to order. Flow is published as curves, not a single rating, so ask us to confirm sizing from the datasheet before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
Airtac GF Filter GF300C10AJW FAQ
AirTAC publishes filter performance as flow curves, not a single rated flow figure, so we do not quote one number here. Tell us your line pressure and air demand and we will confirm the flow data from the datasheet for this exact model on request before you order.
The W suffix selects the finer 5 um element instead of the standard 40 um, giving better protection for downstream valves and cylinders; the A suffix selects an automatic drain, so condensate is expelled from the polycarbonate bowl without manual blow-down. Differential-pressure (default) and manual (M) drains are also available in this series.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GF Filter GF300C10AJW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.