verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF600 · Air Filter (water separation + particulate filtration)

AirTAC GF600-20 Filter (GF60020AWT)

The AirTAC GF600-20 Filter (GF60020AWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT3/4" ports and a automatic drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT3/4"
  • Filtering grade5 µm
  • DrainAutomatic drain
  • Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
  • Bowl materialAluminium alloy
  • ThreadNPT
  • BracketMounting bracket included
$100.28 $107.78Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF600 stroke, mounting and version on one page All GF600 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF600-20 Filter (GF60020AWT)

GF60020AWT is a genuine AirTAC GF-series air filter for compressed air only. It removes water and fine particulate from the line - it does not regulate pressure and it does not lubricate. This size 600 configuration has a NPT3/4 (NPT) port, the finer 5 um (W) filter element and a differential-pressure drain. The 600-size bowl is aluminium alloy, the maximum working pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing). The blank bracket position means a mounting bracket is included.

This is a genuine AirTAC part. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow figures are published as curves rather than a single rated number - ask us and we will confirm the datasheet for this exact model on request.

AirTAC GF600-20 Filter (GF60020AWT) Technical Specifications

ModelAirTAC GF600-20 Filter (GF60020AWT)
SeriesGF600 air filter
Port sizePT3/4" (NPT thread)
Filtering grade5 µm
Drain typeAutomatic drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialAluminium alloy
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF600-20 Filter (GF60020AWT)

GF600G-series air filter, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
ADrain: Automatic drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF600 · PT3/4" · 5 µm
One size downGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF600-20 Filter (GF60020AWT) Is Used

build

Plant air header drop for pneumatic tools

Mounted on the bracket at a 3/4 in drop from the main plant air header, it strips water and fine debris before assembly-line impact tools and air ratchets.

handyman

Maintenance-shop filtration station

A bracketed point-of-use filter at the maintenance shop's air reel, giving technicians clean, dry air for job-site pneumatic equipment brought in for service.

local_shipping

Truck fleet service bay air

Conditions the compressed air used in commercial-vehicle service bays for brake-system testing and air-tool work, catching water and grit before it enters vehicle air circuits.

Is the AirTAC GF600-20 Filter (GF60020AWT) the Right Filter?

This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The drain is the default differential-pressure type; automatic (A) and manual (M) drains are catalogue alternatives. Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 5 µm element when pressure loss rises.

The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF600-20 Filter (GF60020AWT) FAQ

AirTAC publishes GF flow as performance curves rather than a single rated figure, so we do not quote one number here. Send us your line pressure and required flow and we will confirm the sizing from the datasheet on request.

Yes. The blank bracket position on GF60020AWT means a bracket is included; if you do not need one, the J-suffixed version of the same 600-size, NPT3/4, 5 um filter is supplied without a bracket.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF600-20 Filter (GF60020AWT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF60020AWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.