verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF600 · Air Filter (water separation + particulate filtration)

AirTAC GF600-20 Filter (GF60020MJWT)

The AirTAC GF600-20 Filter (GF60020MJWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT3/4" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT3/4"
  • Filtering grade5 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialAluminium alloy
  • ThreadNPT
  • BracketSupplied without bracket
$82.06 $89.56Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF600 stroke, mounting and version on one page All GF600 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF600-20 Filter (GF60020MJWT)

GF60020MJWT is an AirTAC G-series air filter, a filtration-only unit: it removes condensed water and particulate from compressed air. There is no pressure regulation and no lubrication in this family. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. With manual drainage, an operator opens the drain periodically to expel collected water, so the bowl is best sited where it can be reached for service. Inlet pressure for this manual-drain filter is 0-0.9 MPa.

This is a genuine AirTAC part. The GF600 is the largest G-series filter frame; the family is also available in 200, 300 and 400 sizes, with 40 um standard or 5 um fine filtration, differential-pressure, automatic or manual drains, and G (BSPP) or NPT thread options. Flow is published by AirTAC as performance curves rather than a single rated figure, so ask us to confirm sizing and any datasheet value against your application before ordering.

AirTAC GF600-20 Filter (GF60020MJWT) Technical Specifications

ModelAirTAC GF600-20 Filter (GF60020MJWT)
SeriesGF600 air filter
Port sizePT3/4" (NPT thread)
Filtering grade5 µm
Drain typeManual drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialAluminium alloy
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF600-20 Filter (GF60020MJWT)

GF600G-series air filter, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF600 · PT3/4" · 5 µm
One size downGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF600-20 Filter (GF60020MJWT) Is Used

factory

Plant air main take-off

Installed at the 3/4 in branch feeding a production hall, the GF60020MJWT strips pipe-scale, rust particles and condensed water from the factory air main before the supply reaches workstations.

local_shipping

Truck and bus service garage

On the shop-air drop feeding tyre-inflation and impact-wrench stations, the manual-drain bowl is bled at shift start while the 5 um element keeps grit out of couplings and chucks.

build

Woodworking shop dust-adjacent lines

Mounted on the compressed-air ring main serving saws and pneumatic clamps in a joinery, the fine 5 um grade protects tools from fine dust-laden particulate carried in the shop air.

Is the AirTAC GF600-20 Filter (GF60020MJWT) the Right Filter?

Start with size and port: the 600 frame with a 3/4 in NPT port is the right choice when your line diameter and air demand sit at the top of the G-series range; step down to 200/300/400 if your demand is smaller. On drainage, choose manual (this unit) when an operator can reliably bleed the bowl, automatic where you want continuous unattended draining, or the differential-pressure default. This unit carries the 5 um W element - pick it for finer downstream protection, or take the blank code for the 40 um standard element. No mounting bracket is supplied on the J version; order the plain code if you want the bracket. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 5 µm element when pressure loss rises.

The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF600-20 Filter (GF60020MJWT) FAQ

AirTAC does not publish a single rated-flow figure for the GF60020MJWT; flow performance is given as pressure-drop curves across the size, port and element. Send us your line pressure and air demand and we will confirm the sizing from the datasheet curves on request.

Manual drainage means collected condensate stays in the bowl until an operator opens the drain valve, so this version suits installations that are visited daily, such as a service garage or workshop drop. If the filter sits in an inaccessible spot, choose the automatic-drain code (A) or the differential-pressure default instead of the M code.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF600-20 Filter (GF60020MJWT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF60020MJWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.