verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF600 · Air Filter (water separation + particulate filtration)

AirTAC GF600-20 Filter (GF60020MT)

The AirTAC GF600-20 Filter (GF60020MT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT3/4" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT3/4"
  • Filtering grade40 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialAluminium alloy
  • ThreadNPT
  • BracketMounting bracket included
$86.58 $94.08Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF600 stroke, mounting and version on one page All GF600 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF600-20 Filter (GF60020MT)

The GF60020MT is an AirTAC G-series air filter that removes water and particulate from compressed air. It provides filtration only - there is no pressure regulation and no lubrication in this unit. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The bowl on this size 600 unit is aluminium alloy. Because this is the manual-drain version of the GF filter, the maximum inlet pressure is 0 to 0.9 MPa, and the operating temperature range is -5 to 70 C (non-freezing).

This is a genuine AirTAC part sold by an authorised distributor. The G-series filter family spans sizes 200, 300, 400 and 600 with a choice of ports, drain types (differential-pressure, automatic or manual), 40 um or 5 um elements, and three thread types (NPT on this code). Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.

AirTAC GF600-20 Filter (GF60020MT) Technical Specifications

ModelAirTAC GF600-20 Filter (GF60020MT)
SeriesGF600 air filter
Port sizePT3/4" (NPT thread)
Filtering grade40 µm
Drain typeManual drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialAluminium alloy
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF600-20 Filter (GF60020MT)

GF600G-series air filter, 600 body — sets the port range.
20Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
(blank)Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF600 · PT3/4" · 40 µm
One size downGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF600-20 Filter (GF60020MT) Is Used

local_shipping

Truck maintenance bay air supply

Installed on the shop-air drop serving vehicle-lift and impact-wrench stations in a truck or bus maintenance bay, the filter removes water and dirt from the plant supply, with the manual drain emptied during end-of-shift checks.

conveyor_belt

Conveyor system air take-off

Mounted on the 3/4 inch air line feeding conveyor drive and gate cylinders in a distribution warehouse, the size 600 body supplies the high draw of the line while the manual drain is cleared during scheduled maintenance.

build

Assembly cell air preparation

Fitted ahead of nutrunners, clamps and air tools at an assembly cell, the standard 40 um element protects the tools from water and particulate, with the included bracket fixing the filter to the cell frame.

Is the AirTAC GF600-20 Filter (GF60020MT) the Right Filter?

Size 600 with 3/4 inch NPT ports is the largest step in the G-series filter range, so select it when your line demands high air volume - but size against the required flow, not just the pipe. The M code gives a manual drain: the operator opens the drain to discharge condensate, which suits installations with scheduled maintenance rounds or where a dry-air supply means little water collects. Note that with the manual drain the maximum inlet pressure is 0.9 MPa rather than 1.0 MPa. The standard 40 um element covers general plant-air protection; the 5 um (W) variant exists for finer duty. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT3/4" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 40 µm element when pressure loss rises.

The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF600-20 Filter (GF60020MT) FAQ

AirTAC publishes filter flow as performance curves rather than a single rated figure, so we do not quote one number. Send us your application details and we will confirm the flow and the full datasheet for the GF60020MT on request before you order.

The M code replaces the default differential-pressure drain with a drain the operator opens to discharge condensate. On this GF filter the manual-drain version also has a maximum inlet pressure of 0 to 0.9 MPa instead of 1.0 MPa. An automatic drain variant is available if you want hands-free condensate removal.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF600-20 Filter (GF60020MT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF60020MT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.