verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF600 · Air Filter (water separation + particulate filtration)

AirTAC GF600-25 Filter (GF60025MJWT)

The AirTAC GF600-25 Filter (GF60025MJWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1"
  • Filtering grade5 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialAluminium alloy
  • ThreadNPT
  • BracketSupplied without bracket
$82.06 $89.56Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF600 stroke, mounting and version on one page All GF600 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF600-25 Filter (GF60025MJWT)

The GF60025MJWT is an AirTAC GF-series air filter for water and particulate removal only - no pressure regulation, no lubrication. It is the size 600 unit with a 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Manual drain means the bowl is emptied by hand, and the maximum inlet pressure for this manual-drain filter is 0.9 MPa. The 600-size bowl is aluminium alloy, and the J suffix indicates no mounting bracket is supplied. Operating temperature is -5 to 70 C, non-freezing.

This is a genuine AirTAC part. The GF family runs from size 200 to 600 with a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) elements, and three thread types (NPT on this code). Flow data is published only as curves, so we confirm the exact flow and datasheet values for your duty on request.

AirTAC GF600-25 Filter (GF60025MJWT) Technical Specifications

ModelAirTAC GF600-25 Filter (GF60025MJWT)
SeriesGF600 air filter
Port sizePT1" (NPT thread)
Filtering grade5 µm
Drain typeManual drain
BracketSupplied without bracket
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialAluminium alloy
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF600-25 Filter (GF60025MJWT)

GF600G-series air filter, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
JSupplied without bracket. A bracket ships by default; J orders it without.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF600 · PT1" · 5 µm
One size downGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF600-25 Filter (GF60025MJWT) Is Used

precision_manufacturing

CNC machining-centre tool changers

The 5 um element protects the delicate solenoid valves and air bearings of an automatic tool-change carousel from fine particles that standard filtration lets through.

shield

Automotive paint-shop air drops

Feeding spray-gun regulators at a paint booth, the finer 5 um grade reduces particle carryover that would otherwise show up as defects in the finish.

science

Laboratory pneumatic actuators

Bench-top test rigs and sample-handling cylinders rely on clean air; the GF60025MJWT's 5 um element keeps fine debris out of small-bore pilot circuits.

Is the AirTAC GF600-25 Filter (GF60025MJWT) the Right Filter?

Pick the W element when downstream equipment - sensors, spray nozzles, precision valves - needs finer protection than the standard 40 um grade; keep in mind a finer element loads faster and needs more frequent draining and element checks. Size 600 with 1 in. NPT ports matches 1 in. main lines; a smaller GF300 or GF400 may suit lower flows. Manual drain requires hands-on attention; for remote or unattended points, specify automatic (A) or differential-pressure drain. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. The J code omits the bracket. Flow appears as curves, not a single rating, so ask us to confirm sizing before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 5 µm element when pressure loss rises.

The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF600-25 Filter (GF60025MJWT) FAQ

AirTAC publishes filter flow as curves against pressure, not as a single rated figure, so we do not quote one number out of context. Share your operating pressure and demand and we will confirm the flow and datasheet figures for this model on request.

W selects the 5 um filtration element instead of the standard 40 um grade. Everything else about this filter - size 600 body, 1 in. NPT ports, manual drain, aluminium bowl, no bracket - stays the same, giving you finer particulate protection on the same footprint.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF600-25 Filter (GF60025MJWT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF60025MJWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.