verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC GF600 · Air Filter (water separation + particulate filtration)

AirTAC GF600-25 Filter (GF60025MWT)

The AirTAC GF600-25 Filter (GF60025MWT) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT1" ports and a manual drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.

  • TypeAir filter
  • Port sizePT1"
  • Filtering grade5 µm
  • DrainManual drain
  • Inlet pressure0 - 0.9 MPa (0 - 131 psi)
  • Bowl materialAluminium alloy
  • ThreadNPT
  • BracketMounting bracket included
$86.58 $94.08Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every GF600 stroke, mounting and version on one page All GF600 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC GF600-25 Filter (GF60025MWT)

The GF60025MWT is an AirTAC GF-series air filter dedicated to removing water and particulate from compressed air - it contains no regulator and no lubricator. This size 600 unit has a 1 in. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Because it is a manual-drain filter, its maximum inlet pressure is 0.9 MPa. The 600-size bowl is aluminium alloy, and the operating range is -5 to 70 C, non-freezing.

This is a genuine AirTAC part distributed in the US market. The GF range covers sizes 200 to 600, with differential-pressure, automatic or manual drains, 40 um or 5 um (W) elements, and three thread types (NPT on this code). Since AirTAC publishes flow only as curves rather than a single rating, we confirm flow and datasheet figures for your application on request.

AirTAC GF600-25 Filter (GF60025MWT) Technical Specifications

ModelAirTAC GF600-25 Filter (GF60025MWT)
SeriesGF600 air filter
Port sizePT1" (NPT thread)
Filtering grade5 µm
Drain typeManual drain
BracketMounting bracket included
FluidCompressed air
Inlet pressure0 - 0.9 MPa (0 - 131 psi)
Max. working pressure1.0 MPa (145 psi)
Temperature range-5 to +70 °C (unfreeze)
Bowl materialAluminium alloy
FeatureLow pressure loss

Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.

Model Code: AirTAC GF600-25 Filter (GF60025MWT)

GF600G-series air filter, 600 body — sets the port range.
25Port size PT1". This body offers 20 = PT3/4", 25 = PT1".
MDrain: Manual drain. Options are differential (blank), automatic (A) or manual (M).
(blank)Mounting bracket included. A bracket ships by default; J orders it without.
WFiltering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist.
TNPT thread. PT is the default; G is BSPP and T is NPT.

Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.

Size Class

  • GF200PT1/8" - PT1/4"
  • GF300PT1/4" - PT1/2"
  • GF400PT3/8" - PT1/2"
  • GF600PT3/4" - PT1"

A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.

This modelGF600 · PT1" · 5 µm
One size downGF400
Line orderFilter first, then regulator, then lubricator

Where the AirTAC GF600-25 Filter (GF60025MWT) Is Used

view_module

Bottling line fill-head air

Bracket-mounted on the machine frame, the 5 um element conditions air feeding fill-head actuators and gripper cylinders on a high-speed bottling conveyor.

engineering

Robotic welding cell services

Panel-mounted beside the robot controller, the filter cleans the air feeding weld-gun clamp cylinders and tool-change locking rings on the welding cell.

factory

Textile air-jet loom supply

At the loom air manifold, the GF60025MWT removes moisture and fine dirt before air reaches the jet nozzles, helping keep weaving operations consistent.

Is the AirTAC GF600-25 Filter (GF60025MWT) the Right Filter?

The included bracket lets you fix the filter to a frame or panel instead of hanging it on the pipe - worth specifying on machines where the 1 in. piping would otherwise carry the unit's weight. The 5 um element suits finer-protection duties; use the standard 40 um grade where coarse filtration is enough. Manual drain suits attended installations; choose automatic (A) or differential-pressure drain where access is awkward. Size 600 with 1 in. NPT ports matches 1 in. headers; smaller sizes suit lower flows. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.

Quick checklist

  • ✓ Body size for your peak flow (PT1" here)
  • ✓ Element 40 µm or 5 µm
  • ✓ Drain: differential, automatic or manual
  • ✓ Manual drain caps inlet at 0.9 MPa
  • ✓ Thread PT, G (BSPP) or NPT
  • ✓ Bracket needed, or order with J
Ask an Engineer

Installation & Maintenance Notes

  • check Mount vertically, bowl down, and follow the airflow arrow.
  • check Put the filter first in the air-preparation line.
  • check Keep inlet pressure within 0 - 0.9 MPa (0 - 131 psi).
  • check Drain condensate before the bowl fills.
  • check Keep the unit above freezing (-5 to +70 °C, unfreeze).
  • check Replace the 5 µm element when pressure loss rises.

The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.

AirTAC GF600-25 Filter (GF60025MWT) FAQ

There is no single rated-flow figure to quote: AirTAC publishes filter performance as curves against pressure and flow. Give us your line pressure and air demand and we will confirm the relevant flow and datasheet figures for this model on request.

No. On the GF60025MWT the absence of a J suffix means the mounting bracket is included, so the unit can be secured to a frame or panel rather than supported by the pipework. If you specifically do not want a bracket, order the GF60025MJW instead.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC GF600-25 Filter (GF60025MWT)

Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for GF60025MWT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.