Airtac GFR Filter Regulator GFR300C10MNK
The AirTAC Airtac GFR Filter Regulator GFR300C10MNK is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
- TypeFilter regulator
- Port sizeSee datasheet
- Regulating range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Bowl materialPC
- Pressure gaugeFitted
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GFR Filter Regulator GFR300C10MNK
GFR300C10MNK is a genuine AirTAC GFR-series filter regulator, combining water and particulate filtration with pressure regulation in one body, size 300 with a 3/8 in PT port. This build pairs a manual drain (M) on the polycarbonate bowl with the standard 40 um element, includes the mounting bracket, omits the gauge (N), and fits a reverse (check) valve (K). With manual drain the regulating range is 0.05-0.9 MPa (7-130 psi); maximum working pressure is 1.0 MPa (145 psi) and the unit runs on compressed air at -5 to 70 C (non-freezing).
As part of the G series it sits alongside sizes 200, 300, 400 and 600 with 1/8 in to 1 in ports, PT, G (BSPP) or NPT threads, differential-pressure, automatic or manual drains, 40 um or 5 um elements, and gauge options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for this exact code before you order.
Airtac GFR Filter Regulator GFR300C10MNK Technical Specifications
| Model | Airtac GFR Filter Regulator GFR300C10MNK |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GFR Filter Regulator GFR300C10MNK
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
Size Class
- GFR200PT1/8" - PT1/4"
- GFR300PT1/4" - PT1/2"
- GFR400PT3/8" - PT1/2"
- GFR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Where the Airtac GFR Filter Regulator GFR300C10MNK Is Used
Pick-and-place cells on assembly machines
Feeding the gripper and actuator valves of a pick-and-place module, where the regulator sets the working pressure and the filter clears water and particles ahead of the control valves.
Sorting modules in parcel distribution hubs
Regulated air to the diverters, pop-up rollers and stoppers of a sortation line, with the filter bowl catching condensate carried in from the main.
Air-driven assembly fixtures
Supplying pneumatic clamps and pushers at an assembly station, where the operator sets line pressure once and drains the bowl as part of the housekeeping routine.
Is the Airtac GFR Filter Regulator GFR300C10MNK the Right Unit?
Pick the size step (200/300/400/600) to match your port and flow; the 300 with 3/8 in PT is a common choice for machine drops and single-cell supplies. The standard 40 um grade is right for general plant air; choose the W suffix for a 5 um element if the load needs finer filtration. The M manual drain suits attended installations where the bowl is bled on a routine; unattended points are better served by the automatic or differential-pressure variants. The K position adds a reverse (check) valve on this code. No gauge is fitted (N); gauge variants are available in the series. PT is the standard thread, with G and NPT as catalogue options. Flow is published as curves, not a single rating, so send us your flow requirement and we will confirm sizing before you order.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain sets the regulating band
- ✓ Gauge fitted, shape and scale
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Oil needed downstream? Use GFC instead
Installation & Maintenance Notes
- check Mount vertically, bowl down, following the airflow arrow.
- check One body does the filtering and the regulating — no separate regulator needed.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Adjust only within 0.15 - 0.9 MPa (20 - 130 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
Airtac GFR Filter Regulator GFR300C10MNK FAQ
AirTAC does not publish a single rated flow figure for this family - flow is given as performance curves. Tell us your inlet pressure and the flow your circuit needs, and we will confirm the datasheet curve and check the sizing for this exact code on request.
K indicates that a reverse (check) valve is fitted to this filter regulator. Otherwise the code decodes as size 300, 3/8 in PT port, manual drain, standard 40 um element, bracket included and no gauge.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac GFR Filter Regulator GFR300C10MNK
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.