The AirTAC AirTAC GFR200C08JC2WK Filter Regulator PT1/4 5um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200C08JC2WK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration carries a 1/4 in PT port, a fine 5 um filter element (the W grade, versus the 40 um standard), a differential-pressure drain that bleeds collected condensate automatically as flow passes through, a round pressure gauge reading in psi, and a built-in reverse/check valve. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the unit is rated to 1.0 MPa (145 psi) maximum inlet at -5 to 70 C, non-freezing. The polycarbonate bowl suits the size-200 frame, and this code is specified without a mounting bracket.
This is a genuine AirTAC part from the GFR filter-regulator line, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um filtration, gauge type and scale options, and G or NPT thread variants to order. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures for your application on request.
| Model | AirTAC GFR200C08JC2WK Filter Regulator PT1/4 5um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Feeds filtered, regulated air to the tool-changer and clamping circuits of a small CNC machining center, with the 5 um element protecting tight solenoid valves from fine particulate.
Mounted at a drop point on a bottling conveyor to condition air for gripper and pusher cylinders, where the differential-pressure drain keeps condensate moving without operator attention.
Prepares air for a lab bench running pneumatic test fixtures, giving the technician a psi-reading gauge and fine 5 um filtration ahead of sensitive instruments.
Start with the port: the 1/4 in PT connection on this size-200 unit suits compact supply points; step up to GFR300/400/500-class ports if the line demands more passage. Choose the drain to match duty: differential-pressure (as here) suits steady flow, automatic suits intermittent or unattended lines, and manual suits tightly monitored points. This unit carries the 5 um (W) element; the 40 um standard grade remains available if coarser protection is enough. The round psi gauge is fitted here; embedded square gauges and MPa or bar scales are the other catalogue choices. PT is the standard thread, with G (BSPP) and NPT orderable as specifications, and a mounting bracket can be added where this no-bracket code omits one. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a l/min or SCFM figure. Tell us your line pressure and consumption and we will confirm the sizing from the datasheet on request before you order.
The W code in GFR200C08JC2WK selects the 5 um filter grade, one step finer than the 40 um standard element, for points where downstream valves or instruments need cleaner air. Both grades are catalogue options across the GFR family, so you can match the grade to each drop.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.