The AirTAC AirTAC GFR200C08MLJF1TK Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR200C08MLJF1TK is an AirTAC GFR filter regulator: a filter and a pressure regulator built into one body, so the air is cleaned of water and particulate and its working pressure set in a single unit. This configuration is the size 200 body with a 1/4 in NPT port, the low-pressure (L) regulator type, a manual drain (M), the standard 40 um filter element, a metal bowl, an embedded square gauge reading in MPa, and a built-in reverse/check valve (K); it is supplied without a mounting bracket (J). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200 to 600, with port options from 1/8 in to 1 in and a choice of drain type, 40 um or 5 um (W) filtration, gauge style and scale, G (BSPP) or NPT thread, and bracket or no bracket. AirTAC publishes flow for this family as curves rather than a single rated figure, so send us your line pressure and air demand and we will confirm sizing and the datasheet figures on request.
| Model | AirTAC GFR200C08MLJF1TK Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · See datasheet · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-C0 (two-unit set) |
Point-of-use air prep for clamping cylinders on a machining fixture, where the clamp circuit is run at a lower setpoint than the main shop line and the low-pressure regulator type matches that duty.
Filtered, regulated air for valve positioners and actuator pilots on a process skid, with the reverse/check valve (K) fitted in this configuration.
A filter regulator ahead of cylinders, air jets and grippers on a carton-sealing or case-packing conveyor, giving each station its own clean air at its own set pressure.
Choose the size by port and demand: GFR bodies step through 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and this unit sits at the small end - size 200 with a 1/4 in NPT port. If your air demand runs near the top of what a 200-body curve covers, step up a size; we can read the curve with you before you order. Drain: this unit is manual (M), so the bowl is emptied by hand; automatic (A) and differential-pressure versions suit installations that are hard to reach. Filter grade: the standard 40 um element is fitted here; specify W for the 5 um element where finer filtration matters. Gauge: the embedded square gauge on the MPa scale is included, with an external round gauge and psi or bar scales available as options. Thread: NPT as ordered here; PT is the standard thread and G (BSPP) is also a catalogue option. This unit carries no mounting bracket (J); add one if you need to panel-mount. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated number, so there is no one l/min or SCFM figure we can quote honestly. Send us your inlet pressure, setpoint and air demand and we will confirm the flow curve and datasheet figures for this exact model on request.
This model carries the M manual drain: collected water is released by opening the drain by hand, which suits attended stations covered by a regular walk-round. If the unit will sit in an inaccessible spot, the A automatic-drain variant of the same size removes that task - ask us and we will identify the equivalent code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.