The AirTAC AirTAC GFR300C08JF2 Filter Regulator 1/4 in PT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C08JF2 is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one compact body. This size 300 unit carries a 1/4 in PT port, a 40 um standard filtration element and a differential-pressure drain that opens to expel collected condensate as the pressure drop across the element builds. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) setting range, an embedded square gauge reading in psi is fitted, and no mounting bracket or reverse/check valve is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with manual or automatic drains, a 5 um element (code W), G or NPT threads, alternative gauge scales and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | AirTAC GFR300C08JF2 Filter Regulator 1/4 in PT |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Feed the air line serving a CNC fixture-clamping circuit: the 40 um element stops condensate and swarf-laden moisture reaching the clamping cylinders while the regulator holds a steady clamp pressure.
Point-of-use preparation for the sealing and diverting cylinders on a carton packaging line, keeping set pressure stable as several actuators cycle on a shared 1/4 in drop.
Supply the stopper, gate and pusher cylinders along a bottling conveyor, with the square psi gauge letting line staff check the set pressure at a glance.
Choose the size by port and demand: size 300 with a 1/4 in PT port suits moderate-flow drops; step up to 400/600 or down to 200 as your requirement changes. Drain options are differential-pressure (this unit, the default), automatic (code A) or manual (code M); the 40 um element is standard and a 5 um element (W) is available for finer protection. The square gauge here reads psi, with MPa and bar scales as alternatives and an external round gauge optional. PT is the standard thread - G (BSPP) and NPT are order options - and a bracket can be added; this code is ordered without one. Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves, not as a single rated figure, so we do not quote a number here. Tell us your operating pressure and air demand and we will confirm the flow figures from the datasheet on request.
This unit drains the bowl automatically as the pressure drop across the 40 um element builds, so there is no daily manual draining task. If you prefer a fully automatic drain (code A) or a manual drain valve (code M), both are order options in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.