Airtac GL Lubricator GL200C08J
The AirTAC Airtac GL Lubricator GL200C08J is a genuine G-series air lubricator. It meters an oil mist into the compressed-air line so cylinders, valves and air tools downstream stay lubricated, with See datasheet ports and a pc oil bowl. A lubricator does not filter or regulate — it goes last in the line, after the filter and the regulator.
- TypeAir lubricator
- Port sizeSee datasheet
- Inlet pressure0.05 - 1.0 MPa
- Oil bowlPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GL Lubricator GL200C08J
The GL200C08J is an AirTAC G-series air lubricator: its only job is to add a controlled oil mist to the compressed air line so downstream cylinders, valves and air tools stay lubricated. It does not filter the air and it does not regulate pressure. This size 200 unit has a PT 1/4 in port, and the J suffix means it is supplied without a mounting bracket - the right choice when you panel-mount the unit or bolt it into an existing assembly. The bowl on this size is polycarbonate (PC). Max working pressure is 1.0 MPa (145 psi), working temperature -5 to 70 C (non-freezing), medium compressed air only.
This is a genuine AirTAC part, sold by an authorised distributor. The G-series lubricator range runs from size 200 to 600 with larger ports and increasing flow as the size number rises, and PT (standard), G or NPT thread options to order. Flow is published as curves rather than a single rated number, so we confirm the exact datasheet and flow data for your application on request.
Airtac GL Lubricator GL200C08J Technical Specifications
| Model | Airtac GL Lubricator GL200C08J |
|---|---|
| Series | GL200 air lubricator |
| Port size | See datasheet (PT thread) |
| Oil bowl material | PC |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.05 - 1.0 MPa (7 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Function | Oil-mist lubrication only |
Specifications follow the official AirTAC G-series air-preparation data. A lubricator has no drain, no regulating mechanism, no gauge and no filter element, so none of those figures apply. Oil grade, bowl capacity, flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GL Lubricator GL200C08J
| GL200 | G-series air lubricator, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
The lubricator has the shortest code of the six G-series subfamilies — size, port, bracket, thread. There is no drain, pressure-type, gauge or filtering-grade position. Example: GL300-10JG is a 300 body, PT3/8", no bracket, G (BSPP) thread.
Size Class
- GL200PT1/8" - PT1/4"
- GL300PT1/4" - PT1/2"
- GL400PT3/8" - PT1/2"
- GL600PT3/4" - PT1"
A larger body carries a larger port and passes more air. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GL600 uses an aluminium-alloy oil bowl; the 200, 300 and 400 bodies use PC.
| This model | GL200 · See datasheet |
|---|---|
| One size up | GL300 |
| Line order | Filter first, then regulator, lubricator last |
Where the Airtac GL Lubricator GL200C08J Is Used
Lubrication on a plant-wide 1/4 in distribution header
Built into a customer-fabricated distribution header serving assembly stations across a plant floor, the bracketless GL200C08J oils the cylinders and valves tapped from the 1/4 in line.
OEM pneumatic panel for material handling modules
Integrated by machine builders into their own backplate layout on material handling modules, it adds oil mist to the 1/4 in circuit feeding grippers and transfer cylinders without needing a bracket.
Point-of-use feed for pneumatic sanders in a woodshop
Installed on the drop ahead of random-orbital and belt sanders in a furniture workshop, the PC-bowl lubricator keeps tool motors and bearings oiled while the shop's own rack supports the unit.
Is the Airtac GL Lubricator GL200C08J the Right Lubricator?
Choose the size step by port and flow: GL200 is the compact entry size, and this C08J version carries a PT 1/4 in port - one step up from the C06 - for heavier point-of-use demand, with GL300, GL400 and GL600 continuing upward. Because this is the J version, it ships without a mounting bracket; specify it only when the unit is panel-mounted or supported by your own fixture, otherwise order the standard GL200C08 which includes one. Thread is PT as standard, with G (BSPP) and NPT available to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Downstream equipment actually needs oil
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
- ✓ Bowl material: PC, or aluminium on GL600
- ✓ Fit after the filter and regulator
Installation & Maintenance Notes
- check Fit last in the line: filter, then regulator, then lubricator.
- check Mount vertically, bowl down, following the airflow arrow.
- check Keep inlet pressure within 0.05 - 1.0 MPa.
- check Use only oil approved for pneumatic lubricators.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Check the oil level regularly; top up before it runs dry.
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The oil mist travels downstream, so if any branch of the line must stay oil-free, take that branch off before the lubricator. We will confirm the recommended oil grade from the factory datasheet on request.
Airtac GL Lubricator GL200C08J FAQ
Yes - on request. AirTAC publishes GL-series flow as performance curves rather than one rated number, so we do not state a stand-alone figure here. Share your working pressure and downstream demand, and we will confirm the sizing against the datasheet before you order.
The J suffix means the GL200C08J is supplied without a mounting bracket; the standard GL200C08 includes one. Function, size, PC bowl and PT 1/4 in port are otherwise identical, so the choice is purely about how the unit is mounted - panel or customer fixture versus bracket support.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GL Lubricator GL200C08J
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.