Airtac GL Lubricator GL300C15
The AirTAC Airtac GL Lubricator GL300C15 is a genuine G-series air lubricator. It meters an oil mist into the compressed-air line so cylinders, valves and air tools downstream stay lubricated, with See datasheet ports and a pc oil bowl. A lubricator does not filter or regulate — it goes last in the line, after the filter and the regulator.
- TypeAir lubricator
- Port sizeSee datasheet
- Inlet pressure0.05 - 1.0 MPa
- Oil bowlPC
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GL Lubricator GL300C15
The AirTAC GL series is a dedicated air lubricator: it adds a fine oil mist to a compressed-air line and nothing else - there is no filtration and no pressure regulation in this unit. GL300C15 is the size 300 body with a PT1/2 port (PT is the standard thread; G and NPT are catalogue thread options). The PC (polycarbonate) bowl holds the oil, the maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C, non-freezing. This version is supplied with the mounting bracket.
This is a genuine AirTAC part distributed for the US market. The GL series is available in sizes 200, 300, 400 and 600, each in a range of port sizes, with or without the mounting bracket, and in PT, G (BSPP) or NPT thread. Lubricator flow is published as curves rather than a single rated number, so ask us to confirm the datasheet and sizing for your application.
Airtac GL Lubricator GL300C15 Technical Specifications
| Model | Airtac GL Lubricator GL300C15 |
|---|---|
| Series | GL300 air lubricator |
| Port size | See datasheet (PT thread) |
| Oil bowl material | PC |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.05 - 1.0 MPa (7 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Function | Oil-mist lubrication only |
Specifications follow the official AirTAC G-series air-preparation data. A lubricator has no drain, no regulating mechanism, no gauge and no filter element, so none of those figures apply. Oil grade, bowl capacity, flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: Airtac GL Lubricator GL300C15
| GL300 | G-series air lubricator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
The lubricator has the shortest code of the six G-series subfamilies — size, port, bracket, thread. There is no drain, pressure-type, gauge or filtering-grade position. Example: GL300-10JG is a 300 body, PT3/8", no bracket, G (BSPP) thread.
Size Class
- GL200PT1/8" - PT1/4"
- GL300PT1/4" - PT1/2"
- GL400PT3/8" - PT1/2"
- GL600PT3/4" - PT1"
A larger body carries a larger port and passes more air. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GL600 uses an aluminium-alloy oil bowl; the 200, 300 and 400 bodies use PC.
| This model | GL300 · See datasheet |
|---|---|
| One size down | GL200 |
| One size up | GL400 |
| Line order | Filter first, then regulator, lubricator last |
Where the Airtac GL Lubricator GL300C15 Is Used
Stamping press air counterbalance supply
Feeding oil mist to the air counterbalance and clamping circuits of a mechanical stamping press on a metal fabrication line.
Food plant conveyor air cylinder supply
Mounted in the 1/2 inch branch feeding divert and pusher cylinders on a conveyor line in a packaging hall, keeping the actuator seals lubricated.
Rock drill and paving tool lubrication
Oiling pneumatic pavement breakers and rock drills on a civil engineering site, fed from the site compressor main through a 1/2 inch line.
Is the Airtac GL Lubricator GL300C15 the Right Lubricator?
Step up or down through the 200/300/400/600 sizes to match the port and flow path you need; size 300 here carries a 1/2 inch port, one step up from the 3/8 inch version in the same body size. Thread: PT is the standard for this code - order the G (BSPP) or NPT variant if your pipework requires it. The mounting bracket is included on GL300C15; choose the J version if you do not want it. Because lubricator flow is published as curves and not as a single rating, ask us to confirm sizing against your air consumption before ordering.
Quick checklist
- ✓ Body size for your peak flow (See datasheet here)
- ✓ Downstream equipment actually needs oil
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
- ✓ Bowl material: PC, or aluminium on GL600
- ✓ Fit after the filter and regulator
Installation & Maintenance Notes
- check Fit last in the line: filter, then regulator, then lubricator.
- check Mount vertically, bowl down, following the airflow arrow.
- check Keep inlet pressure within 0.05 - 1.0 MPa.
- check Use only oil approved for pneumatic lubricators.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Check the oil level regularly; top up before it runs dry.
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The oil mist travels downstream, so if any branch of the line must stay oil-free, take that branch off before the lubricator. We will confirm the recommended oil grade from the factory datasheet on request.
Airtac GL Lubricator GL300C15 FAQ
AirTAC publishes lubricator flow as curves, not as a single rated figure, so there is no single number to quote. Give us your line pressure and air consumption and we will confirm the datasheet curve and the right size on request before you order.
Match the port to your pipework: GL300C15 has the 1/2 inch PT port, while GL300C10 has 3/8 inch in the same size 300 body. Choose by the pipe and fittings already in the circuit, and remember G (BSPP) and NPT threads are catalogue options if PT does not suit your installation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GL Lubricator GL300C15
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.