Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S
A compact double-acting round mini cylinder for tight spots: the MAJ16X10-10S works on a 10 mm stroke, and an external stop screw lets you trim the extend stroke anywhere within the 10 mm window without touching the plumbing. The stainless-steel barrel and hard-chrome plated carbon-steel rod (20 um) shrug off washdown and light corrosion that would pit painted mini bodies.
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. In practice, plan on roughly 60 N of usable push at 0.5 MPa - enough to seat a small switch, kick a chip off a fixture or hold a light cover closed. Fixed anti-impact bumper pads soften both stroke ends, the riveted aluminium covers keep the body short, and the built-in magnet (standard on MA) accepts CMSG, DMSG and EMSG switches straight out of the box.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S Is Used
Switch latching
Seats a microswitch or reed sensor on a packaging machine cam shaft with a repeatable 10 mm press.
PCB push-off
Knocks finished boards off a test nest on an inline electronics line, one light stroke at a time.
Vial hold-down
Clamps small vials or caps under a filling head, working on roughly 60 N of real force at 0.5 MPa.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S the Right Cylinder?
Bore 16 is the smallest in the MA family; if 100.5 N at 0.5 MPa feels thin for the job, step up to the 20 mm bore (157 N push) or the 25 mm bore (245.3 N). For a 10 mm stroke this cylinder is at its best as a short punch or stop - keep the rod free of side loads and guide the part itself. FA flange and LB foot mounts plus I and Y rod knuckles cover most fixturing. The stop screw is a mechanical end stop only: with air lost the piston still drifts, so never use it to hold a load in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa push rises to 140.7 N and pull to 120.9 N. The theoretical maximum at 1.0 MPa is 20.5 kgf. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s.
No. Every MA-series cylinder, including this one, ships with a magnet built in as standard, so CMSG, DMSG and EMSG reed or hall-effect switches clip straight onto the stainless barrel with no special-order piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.