Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 120mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke120 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S
A 120 mm stroke in a 16 mm stainless body: the MAJ16X120-10S is double-acting, and its extend travel can be dialed down within a 10 mm window by turning the external stop screw. Push force at 0.5 MPa is 100.5 N against 86.4 N on the return side.
The rolled-on aluminium covers and stainless tube form a riveted, washdown-tolerant package for food benches and damp cells. Anti-impact pads are fixed - they cushion the landing but cannot be tuned like the cushions on a MAC cylinder. Treat 60 N as your working push at 0.5 MPa, which covers a vertical hoist of about 5 kg once you keep a 2:1 margin, and note the magnet is already fitted for CMSG, DMSG and EMSG switches.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 120 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S Is Used
Sliding-door closer on food carts
Pushes stainless cart doors shut across 110-120 mm of travel; the chrome rod resists grease-laden kitchen air.
Presence check station in electronics
Presses a PCB assembly into a test nest at roughly 60 N working force; the 10 mm trim matches nest heights per product variant.
Label applicator wipe-on cylinder
Positions the wipe-on pad across a 110-120 mm wrapper window on bottling lines; CMSG sensors report extend and retract to the PLC.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S the Right Cylinder?
If 100.5 N at 0.5 MPa is close to your need, budget the 60 N working figure rather than the peak; need more? MAJ20 offers 157 N and MAJ25 245.3 N at the same pressure. The 6 mm rod at 120 mm of stroke has the highest slenderness in the MA line - avoid cantilevered side loads or guide them off-cylinder.
Flange (FA) and foot (LB) mountings plus I/Y knuckles attach it to most light frames; M5x0.8 ports keep plumbing small. Remember the stop screw positions the extend stroke but is not a load lock - with air gone, the piston can still be pushed along.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S FAQ
Double-acting output is 100.5 N extend and 86.4 N retract at 0.5 MPa, rising to 140.7 N and 120.9 N at 0.7 MPa, with a 20.5 kgf theoretical peak at 1.0 MPa. Operating range: 0.15-1.0 MPa (22-145 psi), -20 to +70 C, 30-800 mm/s rod speed, M5x0.8 port.
It is not. The fixed bumper pads simply decelerate the piston at each stroke end to cut noise and wear; tunable air cushions are a feature of the MAC family, not this MAJ. If your cycle needs adjustable deceleration plus trimming, compare the MACJ before ordering.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X120-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.