Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 130mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke130 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S
Trim the extend stroke up to 10 mm on site with the external stop screw - no cylinder swap needed. This 16 mm bore double-acting unit pushes 100.5 N at 0.5 MPa (and 140.7 N at 0.7 MPa), so plan around 60 N of real work once a 0.6 service factor is applied. Porting is M5x0.8 and the 6 mm rod carries an M6x1.0 male thread.
A riveted stainless round barrel pairs with a 20 um hard-chrome plated rod, shrugging off condensation and light washdown where painted minis blister. Fixed anti-impact pads soften stroke ends - deceleration only, not an adjustable cushion. Every unit ships with a standard magnet, so CMSG, DMSG or EMSG switches snap on directly. Speed range is 30-800 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 130 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S Is Used
Vial pusher on a filler
Indexes 30 mL vials along a lab filling line at 130 mm pitch; the 100.5 N output slides glass vials easily, and the 10 mm trim absorbs tray variations.
Kick-off gate actuator
Flips a diverter gate on a small-carton conveyor; 130 mm stroke clears the lane and fixed bumper pads stop the flap without rattle.
Finished-part ejector
Ejects small machined bushings from a fixture nest; trim the 10 mm window so the ejector nose stops short of the nest wall.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S the Right Cylinder?
Start at bore 16 only when loads stay light: its 100.5 N push at 0.5 MPa sits well below bore 20 (157.0 N) and bore 25 (245.3 N). With 130 mm of stroke on a 6 mm rod, brace the load externally or add a Y knuckle to keep side forces out of the bearing. Mount with an FA flange or LB foot; I and Y rod knuckles are available. Remember the stop screw is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S FAQ
At 0.5 MPa the cylinder pushes 100.5 N and pulls 86.4 N; at 0.7 MPa those figures rise to 140.7 N push and 120.9 N pull. The theoretical ceiling at 1.0 MPa is 20.5 kgf. Working pressure is 0.15-1.0 MPa (22-145 psi) and speed runs 30-800 mm/s.
No - a piston magnet is standard on every MA-series cylinder. CMSG, DMSG and EMSG switches clip straight onto the stainless barrel without any special-order variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.