Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S
Short travel, big control: 15 mm of stroke that the stop screw can shave back 10 mm for fine-position work. Push force is 100.5 N at 0.5 MPa - budget roughly 60 N for the actual task to keep margins honest. Ports are M5x0.8; the 6 mm rod carries an M6x1.0 thread.
Construction is a riveted stainless round body with a hard-chrome carbon-steel rod, compact enough to bolt beside M5-fitted fixtures in food or lab equipment. The standard built-in magnet pairs with CMSG / DMSG / EMSG reed or Hall switches for end-of-travel confirmation. Pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, anti-impact pads fixed at both ends.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S Is Used
Cosmetic cap press
Presses snap caps onto 15 mL serum bottles in a 15 mm move; trimming 10 mm adjusts press depth when cap batches change.
PCB ejector pin
Pops finished boards off a test fixture with a 5-15 mm nudge; the 6 mm chrome rod aligns with the fixture eject slot.
Presence pin on a fixture
Probes whether a workpiece is seated: a CMSG switch on the standard magnet confirms full retraction each cycle.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S the Right Cylinder?
For this force class, going smaller is impossible - bore 16 is the smallest MA - so step to bore 20 (157.0 N) or 25 (245.3 N) at 0.5 MPa if 100.5 N runs close to your load. Keep the driven mass light; at 15 mm travel there is little run-up for the fixed bumper pads to arrest. An I or Y knuckle on the M6x1.0 rod thread suits pressing pads; FA and LB mounts round out the options. Do not rely on the trim screw to hold position - it only caps the extend stroke within its 10 mm window.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S FAQ
Expect 100.5 N push and 86.4 N pull at 0.5 MPa. Raise supply to 0.7 MPa and you get 140.7 N push and 120.9 N pull, while the theoretical maximum at 1.0 MPa is 20.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi).
Fixed anti-impact bumper pads absorb the deceleration at both ends. They are not an adjustable air cushion - and the stop screw likewise only trims the extend stroke within its 10 mm window, never lengthening it past 15 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.