Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S
A 10 mm trim window makes this bore-16 MAJ a fine-position tool: dial the extend stroke anywhere between 140 and 150 mm with the external stop screw when a fixture needs a nudge rather than a rebuild. Double-acting air moves the 6 mm rod both ways, giving 100.5 N out and 86.4 N back at 0.5 MPa.
Round stainless barrel, riveted aluminium covers and a 20 um hard-chrome rod shrug off splash and mild washdown where painted mini cylinders peel. At 0.5 MPa expect about 60 N of honest working force, or a vertical lift near 5 kg with a 2:1 margin. Fixed bumper pads take the sting out of stroke ends - true adjustable cushioning lives in the MACJ family. The magnet ships standard, ready for CMSG / DMSG / EMSG reed switches.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S Is Used
Ejector pin on a small mould
Fine 10 mm trim ejects thin plastic parts from a bench-top injection fixture without marring the surface.
Label press-down roller
Presses self-adhesive labels onto cosmetic bottles over the last 140-150 mm of travel.
Delicate pick grip
Clamps soft rubber grommets in an electronics assembly cell with a gentle sub-100 N grip.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S the Right Cylinder?
There is no smaller MA bore, so if 100.5 N at 0.5 MPa is marginal, move to the 20 mm bore (157.0 N) or the 25 mm bore (245.3 N). The stop screw sets an end position; it will not hold a load against drifting when air drops. FA flange and LB foot keep the mounting simple, and I / Y rod knuckles adapt the tooling side. On a 150 mm stroke, keep the 6 mm rod aligned with the load axis to limit bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S FAQ
Running at 0.5 MPa it pushes 100.5 N and pulls 86.4 N; step up to 0.7 MPa for 140.7 N push and 120.9 N pull. Maximum theoretical force at 1.0 MPa is 20.5 kgf. Supply is filtered air at 0.15-1.0 MPa (22-145 psi).
Bore 16 is served by a single pair of M5x0.8 tapped ports on the barrel, and the rod thread is M6x1.0 male. Fluid is air filtered to 40 um, -20 to +70 C, speed 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.