Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S
Wide latitude in one part number: the MAJ16X160-40S ships with a 40 mm adjustable window, so commissioning crews can set extend travel anywhere down to 120 mm on the machine. It is a double-acting Dia 16 mini rated at 100.5 N push and 86.4 N pull at 0.5 MPa.
The riveted round body packs stainless-barrel durability into a compact envelope, and the magnet built into every MA piston means CMSG, DMSG or EMSG switches mount without a special order. Standard limits are 0.15-1.0 MPa (22-145 psi) supply, -20 to +70 C, and 30-800 mm/s travel speed.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S Is Used
Tray lane pusher
Sorts small blister packs into lanes on a pharma packaging line; one cylinder serves several lane depths thanks to the wide 40 mm trim.
Wire-form ejector
Ejects bent wire parts from a forming die on a compact press bench; 140.7 N at 0.7 MPa clears light springback.
Bench stop gate drive
Drives a stop arm across the end of a gravity roller track, re-tuned per SKU with the external stop screw in minutes.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S the Right Cylinder?
This is the last bore before MAJ20, which lifts the push figure from 100.5 N to 157 N at 0.5 MPa if your payload grows. Vertically, the rod will lift about 10 kg at 0.5 MPa on paper; halve that and target a 5 kg part weight in practice. At 160 mm on a 6 mm rod, keep side loads near zero and guide the payload externally. The trim stop shortens the extend stroke only and never acts as a load brake; fixed bumpers handle the end-of-stroke deceleration instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S FAQ
At 0.5 MPa: 100.5 N push, 86.4 N pull. At 0.7 MPa: 140.7 N push, 120.9 N pull. Theoretical maximum 20.5 kgf at 1.0 MPa. Stroke is 160 mm with a 40 mm adjustable window, ports M5x0.8, male rod thread M6x1.0.
FA flange and LB foot brackets, plus I and Y rod knuckles, are the mounting choices for this adjustable series. Because the magnet is standard, CMSG, DMSG and EMSG switches clip onto the stainless barrel for end-of-stroke signalling out of the box.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.