Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S
Set any extend stroke from 85 mm to the full 160 mm: this double-acting mini cylinder carries a 75 mm adjustable window trimmed by an external stop screw, with fixed anti-impact pads softening each end of travel. Bore 16 output is 100.5 N push and 86.4 N pull at 0.5 MPa - light-ejection territory.
Construction favours dirty air: a riveted stainless-steel round barrel with a hard-chrome plated 6 mm rod resists washdown and mild corrosion where painted mini bodies flake. The magnet ships built in, so DMSG or EMSG switches drop on with no special piston. Budget about 60 N of usable push at 0.5 MPa (around 0.6 of rating), which lets the rod raise roughly 5 kg vertically at a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S Is Used
Carton reject pusher
Tips faulty cartons off a checkweigher conveyor; 100.5 N at 0.5 MPa is ample for 100 g cartons, and the wide 75 mm window matches varied reject points.
Terminal trim press feed
Advances cut terminals into a crimp die on a wire-harness bench; the stainless barrel copes with metal swarf and cutting-fluid spray.
Sample elevator, lab analyser
Lifts reagent trays of about 5 kg vertically inside a clinical analyser with a 2:1 margin on the 100.5 N push.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S the Right Cylinder?
Compare forces before committing: bore 20 steps up to 157 N at 0.5 MPa and bore 25 to 245.3 N, useful if high duty cycles push friction up. Note the adjuster is purely a mechanical extend-stroke end stop; it is not a mid-stroke lock, and the rod will coast if air is lost. Choose FA flange or LB foot mounting, I or Y knuckles for pivoting loads, and keep the 160 mm stroke free of side load on the 6 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S FAQ
Push 100.5 N and pull 86.4 N at 0.5 MPa, push 140.7 N at 0.7 MPa, and a theoretical peak of 20.5 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) air filtered to 40 um for 30-800 mm/s travel.
An external stop screw shortens the extend stroke anywhere between 85 mm and 160 mm, acting as a mechanical end stop - not a mid-stroke brake - so position is not held if air pressure drops. Mounting options are an FA flange or an LB foot.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.