Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S
Wide setting freedom: a 100 mm adjustable window lets this double-acting mini cylinder run anywhere from 75 mm to the full 175 mm extend stroke, set by an external stop screw and cushioned by fixed anti-impact pads. Output sits in the light-duty class - 100.5 N push, 86.4 N pull at 0.5 MPa.
Where humidity or splash would ruin painted mini bodies, the riveted stainless-steel barrel with its hard-chrome plated 6 mm rod keeps sealing and gliding surfaces clean. CMSG, DMSG or EMSG switches attach without ordering options because the magnet is built into every MA piston. For real-world sizing count on close to 60 N of work at 0.5 MPa and a vertical lift near 5 kg once a 2:1 margin is applied.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S Is Used
Oven door latch
Secures a small curing-oven door; the stainless body and rod survive the humid heat that corrodes painted minis.
Tote divert kick stop
Knocks totes sideways at a sorter junction; light totes need only a fraction of the 100.5 N push available at 0.5 MPa.
Sample compactor
Packs powder into 30 mm test cups on a geotech bench; the 100 mm window sets compaction height per cup type.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S the Right Cylinder?
Step up in force where needed: bore 20 roughly halves the effort at 157 N push per 0.5 MPa, bore 40 tops the range at 628.3 N. The adjuster acts as a mechanical end stop for the extend stroke, so it will not hold the rod against gravity or vibration when air is lost - plan a locking valve instead. FA flange or LB foot mount, I or Y knuckles for pivots, and guide any off-centre load externally since the slim 6 mm rod sees 175 mm of unsupported travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S FAQ
100.5 N push / 86.4 N pull at 0.5 MPa, 140.7 N push at 0.7 MPa, theoretical max 20.5 kgf at 1.0 MPa. Supply air at 0.15-1.0 MPa (22-145 psi), filtered to 40 um, cycle speed 30-800 mm/s.
The MAJ's bumper pad is fixed and simply decelerates the piston at each stroke end - it is not an adjustable air cushion like the MAC family offers, and it cannot be tuned. It also does not hold loads; the stop screw is a positioning end stop only.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.