Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S
Small assembly heads that need an exact extend limit fit the MAJ16X175-30S: a 16 mm bore delivering 100.5 N push and 86.4 N pull at 0.5 MPa, with the stop screw trimming the extend stroke over a 30 mm window. Operating band is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, temperature -20 to +70 C.
The 20.5 kgf theoretical ceiling at 1.0 MPa leaves headroom for short pressure spikes. AirTAC rolls the stainless barrel, aluminium covers and stainless block into one riveted unit - no tie rods to loosen under vibration. The heterogeneous piston seal also stores grease, cutting relube intervals. Every cylinder carries a standard magnet for CMSG, DMSG or EMSG switches. Size for about 60 N of real work at 0.5 MPa, which is roughly a 5 kg vertical lift at a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S Is Used
Needle setting head in a textile machine
Sets light spring-loaded needles row by row; the 30 mm window absorbs tolerance stack between needle bars without re-machining stops.
Carton tab folding on a small case packer
Folds glue tabs on compact cartons at the stitch station; 60 N of usable push at 0.5 MPa is sufficient for light board.
Dose-stop positioner on a lab filler
Limits the fill-stop lever travel and confirms position via an EMSG switch on the standard magnet, keeping dose cutoff repeatable.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S the Right Cylinder?
If 100.5 N at 0.5 MPa is close to your need, the 20 mm bore (157.0 N) adds margin without a big footprint jump; the 32 mm bore (402.2 N) suits heavier clamps. Remember the 30 mm window only shortens the extend stroke and stops the piston mechanically - it will not hold a load mid-stroke when air fails. FA flange and LB foot mountings, plus I and Y knuckles on the M6x1.0 rod thread, cover most fixings. On a 175 mm stroke, guide the load externally so the 6 mm rod sees little side force.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S FAQ
Push 100.5 N and pull 86.4 N at 0.5 MPa; push 140.7 N and pull 120.9 N at 0.7 MPa; 20.5 kgf maximum theoretical at 1.0 MPa. Air port is M5x0.8, rod is 6 mm with an M6x1.0 male thread.
Its barrel is stainless steel and the carbon-steel rod carries a 20 um hard-chrome plating, so mild corrosion and splash are handled well. It is not a certified washdown product, so confirm harsh chemical duty from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.