Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S
Where end-of-stroke position needs to be dialed in after installation, this 16 mm bore cylinder accepts a 75 mm trim across its 175 mm travel - set the extend stop with a screwdriver, no disassembly. It is double-acting throughout: 100.5 N forward, 86.4 N back at 0.5 MPa, scaling to 140.7 N and 120.9 N at 0.7 MPa.
Construction is a stainless tube rolled onto aluminium covers with a hard-chrome plated 6 mm rod, a combination that shrugs off condensation and mild outdoor exposure. The piston magnet comes standard, so CMSG / DMSG / EMSG switches drop straight on. Practical sizing: derate to roughly 60 N of working push at 0.5 MPa before specifying your tooling. Bumper pads take the sting out of each stroke end, though the stop screw is a positioning aid only and will not arrest the rod if supply air fails.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S Is Used
Jig depth setting on machining fixtures
Machinists wind the extend stop anywhere in the 75 mm window so one bore-16 cylinder suits several drill jig depths, delivering 100.5 N of clamp-side push at 0.5 MPa.
Diverting finger on a parcel sorter
Flicks small parcels between conveyor lanes; the stainless round body tolerates dusty, unconditioned backrooms better than painted minis.
Reagent tray advance in analyzers
Steps sample trays 175 mm per station while a CMSG switch on the standard magnet verifies the trimmed end position.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S the Right Cylinder?
Both directions of travel are air powered, so spring-return sizing is unnecessary; just verify the load sits under about 60 N at 0.5 MPa working force. Longer or heavier duties belong to the 20 mm bore (157 N push at 0.5 MPa) or the 32 mm bore (402.2 N). A 175 mm run on a 6 mm rod means external guiding is wise - the chrome rod handles push, not side bending. FA flange and LB foot mounts plus I / Y knuckles cover most fixturing, and if you want cushioning you can tune, the MACJ adds adjustable air cushions to the same adjustable-stroke idea. The magnet ships fitted, ready for CMSG / DMSG / EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S FAQ
Force at 0.5 MPa is 100.5 N push and 86.4 N pull; at 0.7 MPa it is 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. Port is M5x0.8, rod thread M6x1.0 on a 6 mm rod. The built-in magnet works with AirTAC CMSG, DMSG and EMSG switches.
The external stop screw shortens the extend stroke anywhere within 75 mm of the ordered 175 mm - it cannot lengthen travel beyond that. Retraction stays full length. Treat the stop as a repeatable positioning end stop, not a mid-stroke brake: on air loss the piston drifts freely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X175-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.