Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S
When the last few millimetres decide part quality, the MAJ16X200-10S earns its place: a double-acting Dia 16 round-body cylinder with an external stop screw that trims the extend stroke within a 10 mm window, turning a 200 mm actuator into a precision end-position setter. It delivers 100.5 N push and 86.4 N pull at 0.5 MPa (140.7 N push at 0.7 MPa) on 0.15-1.0 MPa (22-145 psi) air through M5x0.8 ports.
Build quality is where it beats generic minis: a stainless-steel barrel riveted to aluminium covers with a 20 um hard-chrome 6 mm rod resists corrosion in damp or food-area air, and fixed bumper pads take the sting out of stroke ends without the adjustability of an air cushion. The magnet is included as standard for CMSG / DMSG / ESG-style detection - use CMSG, DMSG or EMSG switches. In practice, budget about 60 N for real work at 0.5 MPa, or plan on lifting roughly 5 kg vertically with a 2:1 safety factor.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S Is Used
Blister sealer lid press
Dial in the final 10 mm of lid travel on a small blister sealing head so the heat seal depth is identical on every cycle.
Vision camera infeed stop
Position parts at a fixed stop before a vision inspection camera, with the stop screw set to a tenth-of-a-stroke repeatable datum.
Glue-dot applicator stroke
Fine-trim the dot height of a glue applicator on a carton line by adjusting extend travel inside the 10 mm window.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S the Right Cylinder?
Size up if the load is close to the limit: a 20 mm MAJ bore more than doubles push to 157.0 N at 0.5 MPa, while this 16 mm unit suits lighter clamping and positioning under about 60 N of working force. Remember the adjuster only shortens the extend stroke and acts as an end stop - it will not lock the rod in place if air is lost. FA flange or LB foot mounting plus optional I and Y rod knuckles cover most small-machine layouts; for the full 200 mm stroke, support side loads externally since the 6 mm rod is slender.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S FAQ
Push is 100.5 N and pull is 86.4 N at 0.5 MPa. At 0.7 MPa it reaches 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. It runs at 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s.
The cylinder carries fixed anti-impact bumper pads that soften the deceleration at each end of travel. They are fixed, not adjustable - if you need tunable air cushioning at the stroke ends, the MACJ family is the closer match.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.