Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S
Need one cylinder to reach several stop depths? The MAJ16X200-50S pairs a 200 mm base stroke with a 50 mm trim window, set by an external stop screw without touching the air circuit. Rated at 100.5 N push and 86.4 N pull on 0.5 MPa, plan real work around 60 N - that is roughly a 5 kg vertical lift once you keep a 2:1 margin.
Its stainless round barrel with a hard-chrome plated 6 mm rod shrugs off damp corners, splash zones and outdoor cabinets where painted minis rust. Riveted aluminium covers keep the compact body sealed, and a standard-fit magnet reads to CMSG, DMSG or EMSG switches for repeatable end-of-stroke signals.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S Is Used
Bench fixture clamping
Holds thin sheet-metal blanks on a drill jig with light 60 N-class effort, stop depth re-set for each jig.
Bottle gate switching
Pushes a gate arm to divert small PET bottles between two lanes on a filling line, one setting per lane.
Switch-verified stops
End position confirmed by a DMSG switch so the PLC only advances once the rod is fully home.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S the Right Cylinder?
The 16 mm bore is the lightest in the series; if your fixture needs more than about 100 N at 0.5 MPa, move to the 20 mm bore at 157 N or the 25 mm at 245.3 N. The trim screw sets the extend stop only - it will not hold a load against air loss or back-drive, so add a mechanical lock where sag matters.
Choose FA flange or LB foot mounting, I or Y knuckles on the rod, and tune the extend stroke anywhere from 150 to 200 mm inside the 50 mm window while running 30-800 mm/s. The M5x0.8 ports take PT, G or NPT threads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; raise supply to 0.7 MPa and you get 140.7 N push and 120.9 N pull. The theoretical ceiling is 20.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with rod speeds of 30-800 mm/s.
No - every MAJ ships with a built-in magnet as standard, so CMSG, DMSG or EMSG switches simply clip onto the stainless barrel and report extend and retract positions without ordering a special piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.