Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S
A 75 mm trim range gives this MAJ16X200-75S the widest on-site tuning of the 200 mm set: wind the external stop screw in or out and the extend stroke lands anywhere from 125 mm to the full 200 mm. Force sits at 100.5 N push and 86.4 N pull per 0.5 MPa, with 140.7 N available if you raise supply to 0.7 MPa; budget around 60 N of actual work, about a 5 kg vertical lift with margin.
Construction is a stainless-steel barrel with aluminium covers riveted in place - a round body with no loose fasteners along the tube, suited to food plants and outdoor panels where paint chips and corrodes. Fixed bumper pads take the sting out of stroke ends, and the standard magnet feeds position data to CMSG, DMSG or EMSG switches.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S Is Used
Tray lane divider
Routes bakery trays between three lanes, the extend stroke tuned per lane inside the 75 mm window.
Small press assist
Seats nylon plugs into printed housings, running at up to 140.7 N when supplied at 0.7 MPa.
Vertical product feed
Drops single snack packs from a magazine, handling parts of about 5 kg or less with a safety margin.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S the Right Cylinder?
For fine pushing jobs - indexing, ejecting, gating - 100.5 N at 0.5 MPa covers it; heavier clamps should look at the 20 mm bore (157 N) or the 32 mm at 402.2 N. Treat the 75 mm window as an extend-side stop: under air loss the piston can still be pushed back, so it is not a mid-stroke lock.
FA flange and LB foot mounts are the standard options, with I or Y knuckles for rod-side alignment, and the built-in magnet makes sensing a bolt-on job. Cycle the rod anywhere in its 30-800 mm/s band.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S FAQ
At 0.5 MPa: 100.5 N push, 86.4 N pull. At 0.7 MPa: 140.7 N push, 120.9 N pull. Theoretical maximum: 20.5 kgf at 1.0 MPa. Supply pressure is 0.15-1.0 MPa (22-145 psi) and the extend stroke trims by up to 75 mm.
No. The MAJ carries fixed anti-impact pads that soften the piston's arrival at each stroke end; they decelerate but cannot be regulated. If you need adjustable cushioning plus stroke adjustment, AirTAC's MACJ is the related type to compare.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.