Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 300mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke300 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S
Long reach with a generous tuning range: the MAJ16X300-100S is a double-acting 16 mm mini cylinder whose external stop screw can shorten the 300 mm extend stroke by up to 100 mm on site, ideal when exact gate or slide travel is finalised during commissioning. At 0.5 MPa the rod delivers 100.5 N out and 86.4 N back.
Its stainless round barrel and hard-chrome plated 6 mm rod stand up to washdown better than painted-steel minis, and the riveted body stays slim along the full 300 mm travel. Sized sensibly, that means roughly 60 N of real push at 0.5 MPa - or about a 5 kg vertical lift with a 2:1 margin - enough to swing a light conveyor gate or raise small trays. A magnet ships as standard for CMSG, DMSG or EMSG switches, and fixed bumper pads ease the stroke ends without adjustable-cushion plumbing.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S Is Used
Conveyor gate actuation
The 300 mm travel swings a light divider gate across a narrow belt lane, with up to 100 mm of trim to absorb late layout changes on the line.
Tray lift on a bench cell
With about a 5 kg vertical lift at a halved margin, it raises small stacker trays of vials between pick stations at up to 800 mm/s.
Card pusher on a packaging machine
Side-pushes blister cards into an outfeed chute with about 60 N of working force, and the standard magnet drives a DMSG switch to confirm the parked position.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S the Right Cylinder?
When comparing bores, the 20 mm MAJ adds muscle (157.0 N push at 0.5 MPa) while this 16 mm keeps fittings small with M5x0.8 ports. Remember the stop screw only pins the extend position - it will not hold a load mid-stroke if air bleeds off, so add an external lock where gravity is involved. On a 300 mm stroke, guide the load externally or fit an I or Y rod knuckle to limit side load on the 6 mm rod; FA flange and LB foot mounts are available.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S FAQ
For the MAJ16X300-100S: push 100.5 N and pull 86.4 N at 0.5 MPa, push 140.7 N (pull 120.9 N) at 0.7 MPa, and a theoretical maximum of 20.5 kgf at 1.0 MPa. Pressure range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
No. Every MAJ cylinder, including the MAJ16X300-100S, ships with a built-in magnet as standard, so CMSG, DMSG or EMSG reed switches clamp straight onto the stainless barrel. The bumpers are fixed anti-impact pads - they soften the ends of stroke but are not adjustable air cushions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.