Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 300mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke300 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S
Double-acting mini cylinder with a 30 mm adjustable extend window: an external stop screw trims the 300 mm stroke on site without swapping hardware. At bore 16 the barrel yields 100.5 N of push and 86.4 N of pull at 0.5 MPa, rising to 140.7 N and 120.9 N at 0.7 MPa.
The riveted round body pairs a stainless barrel with a hard-chrome 6 mm rod, so it survives washdown and damp corners that corrode painted minis. AirTAC builds the magnet in as standard, and the fixed bumper pad decelerates the stroke end - plan on roughly 60 N of real work at 0.5 MPa, about 5 kg of vertical lift with margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S Is Used
Packaging gate flipper
Flips cartons or leaflets on a filling line where the 300 mm reach and 100.5 N push at 0.5 MPa cover light deflect duty.
Sample tray indexer
Steps microplate trays between lab stations; the 30 mm trim lets technicians dial the pitch without changing cylinders.
Small-part ejector
Kicks rejected caps or pins off an inspection nest; M5x0.8 ports fit tight manifolds beside the sensor array.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S the Right Cylinder?
Bore 16 is the smallest MA bore; if 100.5 N at 0.5 MPa is marginal, bore 20 delivers 157 N in the same family. The 300 mm stroke sits at the top of the standard range, so guide the rod or add an I or Y knuckle to keep side loads off the 6 mm pin. Mount with FA flange or LB foot; set the stop screw anywhere inside the 30 mm window, and remember the stop holds position only while air holds - it is not a brake and the rod will drift if pressure drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa push rises to 140.7 N and pull to 120.9 N. Theoretical maximum force at 1.0 MPa is 20.5 kgf. Air ports are M5x0.8 and the 6 mm rod carries an M6x1.0 male thread.
No. AirTAC fits the magnet to every MA-series cylinder as standard, so CMSG, DMSG and EMSG switches clip onto the stainless barrel and read end positions straight out of the box.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.