Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 300mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke300 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S
With a 75 mm window the MAJ16X300-75S offers the broadest on-site trim of the bore 16 adjustable range: set the extend stop anywhere up to 75 mm short of the full 300 mm stroke. At 0.5 MPa the cylinder pushes 100.5 N and pulls 86.4 N; 0.7 MPa lifts that to 140.7 N and 120.9 N.
The rolled, riveted round body stays slim where profile cylinders cannot fit, and the stainless tube plus hard-chrome rod stand up to coolant mist on machine tools. Treat 100.5 N as the ceiling: expect near 60 N of usable force at 0.5 MPa, enough to raise about 5 kg vertically with margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S Is Used
Fixture clamp on a CNC jig
Clamps thin aluminium sheet to a CNC jig; the 75 mm window absorbs jig thickness variations without re-fixturing.
Cable-guide tensioner
Keeps light, controlled tension on a wire-routing gantry using roughly 60 N of continuous force at 0.5 MPa.
Chute diverter on a grain sampler
Diverts sample streams in an agricultural lab sampler; stroke trim matches the chute geometry on setup.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S the Right Cylinder?
Before ordering, compare upward: the next bore, 20 mm, raises the push to 157 N at 0.5 MPa if 100.5 N feels tight. Mount via FA flange or LB foot and fit an I or Y knuckle where the load pivots; a 6 mm rod spanning 300 mm needs low side loading or external guides. The stop screw trims the extend stroke only - it never lengthens it past the ordered stroke - and it is a position stop, not a mid-stroke lock, so the rod drifts if pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S FAQ
Push 100.5 N and pull 86.4 N at 0.5 MPa; push 140.7 N and pull 120.9 N at 0.7 MPa; peak theoretical force 20.5 kgf at 1.0 MPa. The extend stroke trims within a 75 mm window via the external stop, and fixed bumpers soften both stroke ends.
Catalog mounts are FA flange and LB foot, with I and Y rod knuckles available for pivoting loads. The adjustable-stroke version carries no SDB or back-cover codes, so plan brackets around the flange or foot.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X300-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.