Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 35mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S
Double acting on both ends of its travel, the MAJ16X35-20S pairs a 16 mm bore with a 35 mm stroke and a 20 mm extend-trim window set by an external stop screw. Push output at 0.5 MPa is 100.5 N - enough for diverting, marking or light press tasks at the very small end of automation.
Round stainless barrel plus a 20 um hard-chrome rod mean the cylinder survives coolant mist and outdoor splash far better than painted mini bodies, and the riveted construction keeps the footprint tight. In practice, reserve about 60 N of the 100.5 N rating for the actual job; that also translates to lifting roughly 5 kg vertically once a 2:1 margin is applied. CMSG / DMSG / EMSG switches mount on the built-in magnet with no special-order piston.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 35 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S Is Used
Small tote diverter on a conveyor lane
Kicks lightweight blister packs from one lane to another; the 20 mm trim absorbs lane-spacing changes.
Label applicator press
Presses a transfer label onto a curved cosmetic bottle with about 60 N of real force at 0.5 MPa.
Tooling stop on a rotary indexer
Stops a light fixture carrier at the indexed angle; a CMSG switch confirms the stop has been reached.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S the Right Cylinder?
Compare before you buy: the 20 mm MAJ bore delivers 157.0 N push at 0.5 MPa, a solid step up from this 16 mm model. The 20 mm window is wide enough to re-stop the extend stroke between fixture revisions without a reorder. Note the adjuster is a mechanical end stop, not a mid-stroke lock - with no air the rod still moves. FA flange, LB foot, and I / Y rod knuckles cover the common mounting patterns.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S FAQ
Push at 0.5 MPa is 100.5 N and pull is 86.4 N; at 0.7 MPa expect 140.7 N push and 120.9 N pull, with 20.5 kgf theoretical peak at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), air filtered to 40 um, speed 30-800 mm/s, port M5x0.8.
No - every MA-series cylinder leaves the factory with a built-in magnet, so CMSG / DMSG / EMSG switches clamp on directly. The heterogeneous piston seal also stores grease, stretching the interval between maintenance stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X35-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.