Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 350mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke350 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S
For jobs needing long travel in a slim package, the MAJ16X350-100S combines a 350 mm stroke - a made-to-order length above the 300 mm standard for this bore - with a 100 mm extend-trim window. The 16 mm bore produces 100.5 N push at 0.5 MPa, best spent on light pushing, lifting and positioning over long spans.
Over a stroke this long the hard-chrome plated 6 mm rod is exposed along its full travel, so the stainless barrel and plated finish earn their keep in misty or outdoor cells; guide the load externally to keep side loads off the rod. Count on about 60 N of practical force at 0.5 MPa, which lifts roughly 5 kg vertically with a 2:1 margin - match that against your part weight before ordering. The built-in magnet drives CMSG / DMSG / EMSG switches for end-position checks.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S Is Used
Probe lift on a leak-test rig
Raises a 2 kg test mandrel 350 mm clear of the fixture; the magnet drives a DMSG switch that confirms the fully retracted safe position.
Cross-transfer pusher
Pushes light totes between two slow conveyor lanes; with about 60 N of practical force at 0.5 MPa keep the tote load under 8 kg on low-friction rollers.
Sampling arm in a lab analyzer
Carries a sampling needle across a 350 mm path; the 100 mm adjust window soaks up fixture tolerance during calibration.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S the Right Cylinder?
At 100.5 N push at 0.5 MPa this sits at the light end of the range; the 20 mm bore (157.0 N) is the next rung if the load creeps up. Because the 350 mm stroke is non-standard, it is built to order rather than shipped off the shelf. A long unsupported rod amplifies side load and bending, so add an external guide for anything beyond pure thrust, and fix the body with an FA flange or LB foot along the frame. The stop screw trims the extend end within 100 mm; it is an end stop, not a brake, so the rod can still drift on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa it reaches 140.7 N push and 120.9 N pull, with a 20.5 kgf theoretical ceiling at 1.0 MPa. Air supply 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, port M5x0.8, rod thread M6x1.0 on a 6 mm rod.
The stroke is made to order (above the 300 mm standard for a 16 mm bore), and the 100 mm adjust window still trims only the extend end. Bracket the cylinder along the long frame and guide the load externally, since a slender 6 mm rod over 350 mm tolerates little side load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.