Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 350mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke350 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S
Three product sizes, one cylinder: the 30 mm stop-screw window on this double-acting MAJ covers three extend positions in the same footprint. The 16 mm bore delivers 100.5 N forward and 86.4 N back at 0.5 MPa, or 140.7 N forward at 0.7 MPa.
Its riveted round construction - stainless barrel, aluminium-alloy covers, hard-chrome 6 mm rod - stays tight in damp and dusty corners where painted minis corrode. Since the magnet is fitted as standard, position switches drop straight on. As a sizing guide, treat roughly 60 N at 0.5 MPa as the practical working force once you leave margin for friction and pressure drop.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S Is Used
Bottle rejector
Kick mis-capped bottles off a filling line lane; the 30 mm band lets QC nudge the strike point as bottle formats change during the week.
Index stop pin
Stop light pallets or carriers on a round indexing table, repositioning the stop within 30 mm for different part families without new brackets.
Drawer latch actuator
Latch and release small test-chamber drawers; the stainless barrel tolerates the humidity inside environmental and climate rooms.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S the Right Cylinder?
Need a step up? The 25 mm bore pushes 245.3 N at 0.5 MPa and the 40 mm bore 628.3 N. This 350 mm stroke is a made-to-order length above the 300 mm standard for bore 16, and over that span the 6 mm rod should work against an external guide rather than take side loads. I and Y rod knuckles plus FA and LB mounts cover the fixings. On air loss the piston drifts, so add a valve or check solution for holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S FAQ
The MAJ16X350-30S produces 100.5 N push / 86.4 N pull at 0.5 MPa and 140.7 N push / 120.9 N pull at 0.7 MPa, with 20.5 kgf theoretical maximum at 1.0 MPa. Fluid is air filtered to 40 um, pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi).
The barrel is stainless steel and the 6 mm piston rod is hard-chrome plated carbon steel, while the covers are aluminium alloy rolled onto the tube. That mix resists mild corrosion and rinse-down far better than painted minicylinders in food or outdoor spots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X350-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.