Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 450mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke450 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S
A fine 10 mm trim window is the point of the MAJ16X450-10S: a 450 mm extend stroke, produced to order since it exceeds the 300 mm standard limit for a 16 mm bore, that can be shortened on site in small steps. Force at 0.5 MPa is 100.5 N out and 86.4 N back; at 0.7 MPa push hits 140.7 N, with 20.5 kgf theoretical at 1.0 MPa. Around 60 N is the honest working figure at 0.5 MPa once you leave margin.
The cylinder is a riveted round-body MA: stainless-steel tube, 6 mm hard-chrome rod, aluminium covers, fixed anti-impact bumpers (deceleration only, no adjustable cushion), and a standard magnet that accepts CMSG, DMSG or EMSG switches. Air ports are M5x0.8.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 450 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S Is Used
Web-break flag trip
Drops a lightweight fault flag across a moving film web on a converting line; the 10 mm trim aligns the trip point with the sensor.
Sample probe park
Lifts a small sampling probe off a long slide in a lab analyser, where the fine adjuster sets a repeatable park position.
Dosing nozzle home
Returns a light dosing nozzle to a fixed home position over 450 mm of travel on a small filling station.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S the Right Cylinder?
For this long, light-duty stroke treat the rod gently: 6 mm over 450 mm tolerates almost no side load, so guide the payload externally and align the thrust line to the bore axis. Should 100.5 N at 0.5 MPa fall short, a 20 mm bore pushes 157.0 N at the same pressure.
FA flange and LB foot are the offered mounts, with I or Y knuckles for the rod end. The 10 mm adjuster sets a repeatable extend endpoint but holds nothing mid-stroke; once air pressure is gone the piston is free to move.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S FAQ
At 0.5 MPa: 100.5 N push, 86.4 N pull. At 0.7 MPa: 140.7 N push, 120.9 N pull. Theoretical maximum at 1.0 MPa: 20.5 kgf. Supply is filtered air, 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
Long strokes often need only a small trim to dial in the stop position after commissioning. The stainless round barrel, hard-chrome 6 mm rod and built-in magnet (CMSG/DMSG/EMSG ready) are unchanged; only the extend endpoint moves, by up to 10 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X450-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.