Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 5mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S
Small parts do not need big travel. The MAJ16X5-10S is a double-acting 16 mm bore mini cylinder with a 5 mm stroke that an external stop screw can trim by up to 10 mm, pushing 100.5 N at 0.5 MPa - light clamping, ejecting and confirm-position duty on compact fixtures.
Its riveted round body pairs a stainless-steel barrel with a 20 um hard-chrome plated rod, so splashes and wipe-downs in food or outdoor cells are far less damaging than they are for painted minis. In practice, treat about 60 N - roughly 60 percent of the 0.5 MPa rating - as the force available for real work, and note the magnet is built in as standard for CMSG, DMSG or EMSG switches.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S Is Used
Micro part ejection
Knocks a 3 g plastic cap off a sorting chute in a bottle-capping line - the 5 mm travel is all the part needs to clear the rail.
Presence confirmation
With the magnet and a CMSG switch, it confirms a latch seated on a PCB test fixture, cycling between two end points 5 mm apart.
Small-carton flap tuck
Tucks the end flap of a cosmetic carton at the folding station, where a longer stroke would smash the box wall.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S the Right Cylinder?
This 16 mm bore is the smallest in the MA family, so there is no step down - if 100.5 N at 0.5 MPa (140.7 N at 0.7 MPa) falls short, move up to the 20 mm bore, which pushes 157.0 N at 0.5 MPa. M5x0.8 ports keep the plumbing tiny. Choose FA flange or LB foot mounting, with I and Y rod knuckles as accessories. The trim screw sets the extend end position only and will not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S FAQ
At 0.5 MPa the 16 mm bore delivers 100.5 N push and 86.4 N pull; at 0.7 MPa it reaches 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s, from -20 to +70 C, with M5x0.8 ports and a 6 mm rod threaded M6x1.0.
Fixed anti-impact pads cushion the stroke ends - they decelerate only and are not adjustable air cushions like the MACJ offers. The body is a riveted round barrel: stainless-steel tube, hard-chrome plated rod and aluminium covers, compact enough to bolt into 5 mm-travel gaps.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X5-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.