Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB
Foot mounting changes where this 16 mm adjustable cylinder can live. The MAJ16X50-20SLB bolts flat through its LB base, trimming its 50 mm extend stroke by up to 20 mm via an external stop screw, and delivering 100.5 N of push (86.4 N retract) at 0.5 MPa.
The same stainless barrel and 20 um hard-chrome rod as the rest of the range shrug off splash zones without paint flaking into the product stream. Size honestly: plan on about 60 N of working force at 0.5 MPa, enough to lift roughly 5 kg vertically with a 2:1 margin, and add a CMSG, DMSG or EMSG switch freely - the magnet comes standard in every MAJ.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB Is Used
Side-rail product pusher
Pushes misaligned vials off a pharma conveyor from a foot bracket under the frame, away from washdown spray.
Label press hold-down
Clamps label stock against a platen on a small press; LB feet keep the cylinder aligned through millions of cycles.
Slide gate actuator
Drives a slide gate on a hopper outlet, with the 20 mm trim matching gate travel to different granule batch sizes.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB the Right Cylinder?
The LB foot spreads thrust onto the mounting plate, which suits horizontal pushers; FA flange and I or Y rod knuckles remain alternatives if the layout changes. Against 0.5 MPa thrust, moving from 16 mm (100.5 N) to 20 mm buys 157.0 N if the 50 mm stroke must shift more mass, and 25 mm reaches 245.3 N. Keep the stop screw role in mind: it pins the extend end point but is not a load-holding device, so support held loads externally when air drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa those become 140.7 N and 120.9 N, and the theoretical ceiling is 20.5 kgf at 1.0 MPa. The cylinder runs on 40 um filtered air at 0.15-1.0 MPa (22-145 psi) at 30-800 mm/s from -20 to +70 C.
LB is a foot (base) mount that bolts the cylinder flat to a plate - convenient for horizontal push runs. AirTAC also offers FA flange mounting and I or Y rod knuckles for the same bore and stroke. The rod side is a 6 mm rod with M6x1.0 male thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X50-20SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.