Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S
Where a compact machine needs most of its travel trimmed by hand, this double-acting 16 mm unit shortens extension with an external stop screw anywhere in the ordered 50 mm window, keeping the full 60 mm retract. Output sits at 100 N push and 86 N pull at 0.5 MPa, climbing to 140 N push at 0.7 MPa on a 0.15-1.0 MPa (22-145 psi) supply.
A stainless rolled barrel with a hard-chromed 6 mm rod shrugs off splash and condensation better than painted aluminium minis, which suits humid bottling cellars and outdoor posts. Fixed bumpers decelerate the piston at each end; tunable cushioning lives in the MACJ family instead. Sizing for the long run, keep applied load around 60 N - enough headroom to raise a 5 kg part vertically with a 2:1 margin. The magnet is factory fitted, so CMSG, DMSG or EMSG switches mount without ordering options.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S Is Used
Hopper gate metering
A tabletop conveyor hopper gate needs only part of the travel; the -50 window dials stroke per recipe while 86 N of pull resets the gate between totes.
Glue bead height stop
On a manual glue station, technicians cut back extension by up to 50 mm so the 100 N nose feathers adhesive beads onto thin plywood without denting it.
Bottling reject push-off
Downstream of a filler, the 100 N push flicks under-filled 250 ml bottles off the line; the 30-800 mm/s speed band matches fast conveyor timing.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S the Right Cylinder?
Compare across the family: the 20 mm bore gives 157 N push at 0.5 MPa if your mechanism runs short on force, while this 16 mm already covers 100 N and saves space. A 50 mm window on a 60 mm stroke leaves 10 mm of fixed extension - confirm your tooling can live with that minimum. Mount by FA flange or LB foot, add I or Y knuckles where the rod pivots, and rely on the built-in magnet for feedback. On air failure the stop screw keeps geometry but not the load; the piston will still sag.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S FAQ
Expect 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, and a theoretical maximum of 20.5 kgf at 1.0 MPa. Supply ranges 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speeds of 30-800 mm/s, an M5x0.8 port and a 6 mm rod.
Yes - every MA-series cylinder ships with the piston magnet already installed at no extra option code. Clip a CMSG, DMSG or EMSG switch onto the stainless barrel for end-of-stroke signaling; the riveted round body keeps the sensor seat stable through vibration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.